Am Samstag 03 April 2004 10:48 schrieb Klaus Becker: > Check mal deine Kernelconfig > > > > wie macht man das? > > > > Hast du den Kernel selbst kompiliert? -> Dann weisst du wo du > > suchen musst. > > > > Wenn nicht, dann vergiss die Frage... > > Den Kernel (kernel-image-2.6.4-1-386) habe ich per "apt-get install" > von backports.org geholt. Bei der Installierung stellte er mir einige > Fragen, die ich nicht so recht verstanden habe. Ich kann mich an die > Fragen nicht mehr erinnern; sie schienen mir nicht so wichtig & ich > habe immer ok gesagt. Kann das bei der Mauserkennung eine Rolle > spielen? Ist es sinnvoll, diesen Kernel mit "dpkg-reconfigure" zu > bearbeiten & worauf muss ich dabei achten, damit die Maus erkannt > wird? > > Habe ich den richtigen Kernel gewählt (ich habe einen AMD 2000XP)? > Kann man woody direkt mit einem Kernel 2.6 installieren oder feht nur > der Umweg über 2.4? > > tschüs > Klaus
Hallo Klaus, Wenn der 2.4er Dir keine Probleme bereitete, bleibe doch dabei. Hier mal der Hilfstext aus menuconfig Abschnitt psmouse, da findest Du weitere Links und Hinweise: http://www.linuxhq.com/kernel/v2.6/5-rc2-bk8/arch/sh/Kconfig -config PSMOUSE - bool "PS/2 mouse (aka \"auxiliary device\") support" - ---help--- - The PS/2 mouse connects to a special mouse port that looks much like - the keyboard port (small circular connector with 6 pins). This way, - the mouse does not use any serial ports. This port can also be used - for other input devices like light pens, tablets, keypads. Compaq, - AST and IBM all use this as their mouse port on currently shipping - machines. The trackballs of some laptops are PS/2 mice also. In - particular, the C&T 82C710 mouse on TI Travelmates is a PS/2 mouse. - - Although PS/2 mice are not technically bus mice, they are explained - in detail in the Busmouse-HOWTO, available from - <http://www.tldp.org/docs.html#howto>. - - When using a PS/2 mouse, you can get problems if you want to use the - mouse both on the Linux console and under X. Using the "-R" option - of the Linux mouse managing program gpm (available from - <ftp://gnu.systemy.it/pub/gpm/>) solves this problem, or you can get - the "mconv2" utility from <ftp://ibiblio.org/pub/Linux/system/mouse/>.