Hi, I meet some errors occasionally ,such as dma_intr: status=0x51 { DriveReady SeekComplete Error } dma_intr: error=0x84 { DriveStatusError BadCRC } eth0: Oversized Ethernet frame spanned multiple buffers, entry 0x6 length 0 status 00000600! in the same time. The frequence of these errors increased with the frequence of IO operations.
That's some information. 1.DMA control 00:0c.0 Unknown mass storage controller: Promise Technology, Inc. 20262 (rev 01) Subsystem: Promise Technology, Inc.: Unknown device 4d33 Flags: bus master, medium devsel, latency 64, IRQ 12 I/O ports at d400 [size=8] I/O ports at d800 [size=4] I/O ports at dc00 [size=8] I/O ports at e000 [size=4] I/O ports at e400 [size=64] Memory at e8020000 (32-bit, non-prefetchable) [size=128K] Expansion ROM at e4000000 [disabled] [size=64K] Capabilities: [58] Power Management version 1 2.my harddisk /dev/hde: Model=ST3200021A, FwRev=3.01, SerialNo=3LJ2EQNN Config={ HardSect NotMFM HdSw>15uSec Fixed DTR>10Mbs RotSpdTol>.5% } RawCHS=16383/16/63, TrkSize=0, SectSize=0, ECCbytes=4 BuffType=unknown, BuffSize=2048kB, MaxMultSect=16, MultSect=16 CurCHS=16383/16/63, CurSects=16514064, LBA=yes, LBAsects=268435455 IORDY=on/off, tPIO={min:240,w/IORDY:120}, tDMA={min:120,rec:120} PIO modes: pio0 pio1 pio2 pio3 pio4 DMA modes: mdma0 mdma1 mdma2 UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma5 AdvancedPM=no WriteCache=enabled Drive conforms to: ATA/ATAPI-6 T13 1410D revision 2: 3.dmesg hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } hde: dma_intr: error=0x84 { DriveStatusError BadCRC } hde: dma_intr: status=0x51 { DriveReady SeekComplete Error } hde: dma_intr: error=0x84 { DriveStatusError BadCRC } 4.kernel version kernel: 2.4.27 using deb 2.4.27-1-686 Thanks a lot for everyone's help. -- Have a nice day,amigo -- Have a nice day,amigo -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]