On 05/13/2007 02:17 AM, Adrian Levi wrote: > After an upgrade from Sarge networking no linger works. I can see no > reason for it. > > I have attached lspci -vvv, dmesg, and ifconfig eth0 and > /proc/interrupts for both kernels 2.6.8-2-686 works perfectly. > > Error message is: > May 13 13:12:39 earth kernel: eth0: link up, 100Mbps, full-duplex, lpa > 0x45E1 > May 13 13:12:39 earth kernel: NETDEV WATCHDOG: eth0: transmit timed out > > dhcp-client refuses to get a lease and static networking doesn't work > either. > > Can anyone else shed some light on this problem.
Actually, no, but this reply is being sent from an etch box with the same kernel and same 8139too chip/driver that you report (but different card). If I can help by posting any output from this box, let me know. I'm no expert at all, but notice that the kernels apparently report ACPI differently, and since you have a timing issue, you could try what is suggested: PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report Also, this morning there is yet another security kernel update; DSA 1289-1 which brings the kernel to 2.6.18.dfsg.1-12etch2. So, perhaps continue testing with that. (I have not yet upgraded to it.) Good luck! Ralph -- To UNSUBSCRIBE, email to [EMAIL PROTECTED] with a subject of "unsubscribe". Trouble? Contact [EMAIL PROTECTED]
