On Tue, Aug 28, 2012 at 7:24 PM, Camaleón <noela...@gmail.com> wrote: > On Tue, 28 Aug 2012 14:12:52 +0500, Muhammad Yousuf Khan wrote: > >> On Mon, Aug 27, 2012 at 7:34 PM, Camaleón <noela...@gmail.com> wrote: > > (...) > >>>> do i have to worry about this? >>> >>> Sure you do. What's connected to ata1.00? (dmesg | grep -i ata1.00) >>> >>> These errors are usually derived not from "bad sectors" but a hardware >>> issue (e.g., bad/loosey cabling). Just to be sure, you can run a full >>> SMART test to diagnose any problem from the disk and better if you use >>> the hdd manufacturer's test disk tools which are usually run from a >>> small live-cd iso. >>> >> here you go. >> >> [ 2.920604] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) >> [ 2.955968] ata1.00: ATA-8: WDC WD5000AVVS-63M8B0, 01.00A01, max UDMA/133 >> [ 2.955972] ata1.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) >> [ 2.961570] ata1.00: configured for UDMA/133 > > That's one of your hard disks so you definitely have to worry for the above > errors. > > You can get WD diagnostic tool from here: > > Data Lifeguard Diagnostic for DOS (CD) > http://support.wdc.com/product/download.asp?groupid=610&sid=30&lang=en > > If both SATA drives pass the tests then open your computer case and reseat/ > reconnect the SATA cables (or better yet, replace them with a set of quality > SATA cables). > > Another test you can perform is getting the ISO image for SystemRescueCD > (livecd) > and boot with it. From here you can check if the errors are gone or still > present > (by doing so you can discard/confirm a problem coming from the raid 1 layout > that > you have set in your main system because the livecd will see/treat both disks > independently, not raided). > >> would you please tell me one more thing. i am using rsyslog server but i >> can not see this critical error on that rsyslog server. > > (...) > > Sorry, but this is not the proper thread to talk about that. Anyway, I already > read the other post you sent about the issue but I have no idea on rsyslog and > remote logging, sorry ;-( No problem :). thanks for all the support
> > Greetings, > > -- > Camaleón > > > -- > To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org > with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org > Archive: http://lists.debian.org/k1ikac$ik9$7...@ger.gmane.org > -- To UNSUBSCRIBE, email to debian-user-requ...@lists.debian.org with a subject of "unsubscribe". Trouble? Contact listmas...@lists.debian.org Archive: http://lists.debian.org/CAGWVfM=5vrdnywhilv9y29gxhmlfwcawde0wx-epj0+rtkf...@mail.gmail.com