On Sun, 24 Apr 2022 22:47:50 -0700
David Christensen <dpchr...@holgerdanske.com> wrote:
> I will assume all three HDD's are the same make and model, per
> smartctl(8) report below.
Nope. Two WD Reds, as the report indicates, but not bought at the same
time so likely to be different in detail. One Seagate Ironwolf.
> >> How is the motherboard connected to the HDD's?
> >
> > SATA. All hdds are on the motherboard,
>
>
> What is on the other ports -- /dev/sda is optical? /dev/sdb and
> /dev/sdc are other two HDD's?
Debian and finnix see things differently. On both. sdc and sdd are part
of the RAID array. On Debian, sda is the system drive: /, /home, /etc,
swap, /boot, etc.. sdb is part of the RAID array. Finnix swaps those
two.
>
>
> SATA cables -- Color? Locking or non-locking connectors? Came
> with motherboard or aftermarket? If the latter, make and model?
All black, two red. The black ones came with the computer. The red ones
are aftermarket, Alchemy SATA3 30 cm. BFA-MSC-SATA330RK-RP. All lock.
> Please run long tests now on all three drives. Save all of the
> reports. Post the report(s) for any drive(s) with SMART failures
> and/or dmesg(1) errors.
Long tests run about 10 hours. I did one overnight on sdd, and it
reported no errors. No dmesg errors sine the ones I reported in the
original email.
--------------------------------------------------
smartctl 7.1 2019-12-30 r5022 [x86_64-linux-5.7.0-2-amd64] (local build)
Copyright (C) 2002-19, Bruce Allen, Christian Franke, www.smartmontools.org
=== START OF INFORMATION SECTION ===
Model Family: Western Digital Red
Device Model: WDC WD40EFRX-68N32N0
Serial Number: WD-<redacted>
LU WWN Device Id: 5 0014ee 2bda92107
Firmware Version: 82.00A82
User Capacity: 4,000,787,030,016 bytes [4.00 TB]
Sector Sizes: 512 bytes logical, 4096 bytes physical
Rotation Rate: 5400 rpm
Form Factor: 3.5 inches
Device is: In smartctl database [for details use: -P show]
ATA Version is: ACS-3 T13/2161-D revision 5
SATA Version is: SATA 3.1, 6.0 Gb/s (current: 6.0 Gb/s)
Local Time is: Mon Apr 25 15:02:26 2022 UTC
SMART support is: Available - device has SMART capability.
SMART support is: Enabled
=== START OF READ SMART DATA SECTION ===
SMART overall-health self-assessment test result: PASSED
General SMART Values:
Offline data collection status: (0x82) Offline data collection activity
was completed without error.
Auto Offline Data Collection: Enabled.
Self-test execution status: ( 0) The previous self-test routine completed
without error or no self-test has ever
been run.
Total time to complete Offline
data collection: (43680) seconds.
Offline data collection
capabilities: (0x7b) SMART execute Offline immediate.
Auto Offline data collection on/off
support.
Suspend Offline collection upon new
command.
Offline surface scan supported.
Self-test supported.
Conveyance Self-test supported.
Selective Self-test supported.
SMART capabilities: (0x0003) Saves SMART data before entering
power-saving mode.
Supports SMART auto save timer.
Error logging capability: (0x01) Error logging supported.
General Purpose Logging supported.
Short self-test routine
recommended polling time: ( 2) minutes.
Extended self-test routine
recommended polling time: ( 463) minutes.
Conveyance self-test routine
recommended polling time: ( 5) minutes.
SCT capabilities: (0x303d) SCT Status supported.
SCT Error Recovery Control supported.
SCT Feature Control supported.
SCT Data Table supported.
SMART Attributes Data Structure revision number: 16
Vendor Specific SMART Attributes with Thresholds:
ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED
WHEN_FAILED RAW_VALUE
1 Raw_Read_Error_Rate 0x002f 200 200 051 Pre-fail Always
- 0
3 Spin_Up_Time 0x0027 168 166 021 Pre-fail Always
- 6583
4 Start_Stop_Count 0x0032 100 100 000 Old_age Always
- 41
5 Reallocated_Sector_Ct 0x0033 200 200 140 Pre-fail Always
- 0
7 Seek_Error_Rate 0x002e 200 200 000 Old_age Always
- 0
9 Power_On_Hours 0x0032 083 083 000 Old_age Always
- 12670
10 Spin_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
11 Calibration_Retry_Count 0x0032 100 253 000 Old_age Always
- 0
12 Power_Cycle_Count 0x0032 100 100 000 Old_age Always
- 41
192 Power-Off_Retract_Count 0x0032 200 200 000 Old_age Always
- 13
193 Load_Cycle_Count 0x0032 198 198 000 Old_age Always
- 7908
194 Temperature_Celsius 0x0022 119 108 000 Old_age Always
- 31
196 Reallocated_Event_Count 0x0032 200 200 000 Old_age Always
- 0
197 Current_Pending_Sector 0x0032 200 200 000 Old_age Always
- 0
198 Offline_Uncorrectable 0x0030 200 200 000 Old_age Offline
- 0
199 UDMA_CRC_Error_Count 0x0032 200 200 000 Old_age Always
- 0
200 Multi_Zone_Error_Rate 0x0008 200 200 000 Old_age Offline
- 0
SMART Error Log Version: 1
No Errors Logged
SMART Self-test log structure revision number 1
Num Test_Description Status Remaining LifeTime(hours)
LBA_of_first_error
# 1 Extended offline Completed without error 00% 12661 -
# 2 Short offline Completed without error 00% 12651 -
# 3 Extended offline Completed without error 00% 10026 -
# 4 Extended offline Completed without error 00% 7 -
# 5 Short offline Completed without error 00% 0 -
SMART Selective self-test log data structure revision number 1
SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS
1 0 0 Not_testing
2 0 0 Not_testing
3 0 0 Not_testing
4 0 0 Not_testing
5 0 0 Not_testing
Selective self-test flags (0x0):
After scanning selected spans, do NOT read-scan remainder of disk.
If Selective self-test is pending on power-up, resume after 0 minute delay.
--------------------------------------------------
--
Does anybody read signatures any more?
https://charlescurley.com
https://charlescurley.com/blog/
