From: sahil <sa...@arm.com>
Moving these functions from NorFlash.c to NorFlashBlockIoDxe.c as
they are not dependent on any particular flash implementation.
Signed-off-by: sahil <sa...@arm.com>
---
Platform/ARM/Drivers/NorFlashDxe/NorFlash.c | 129
--------------------
Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c | 129
++++++++++++++++++++
2 files changed, 129 insertions(+), 129 deletions(-)
diff --git a/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c
b/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c
index 1b431073ee93..60854ef2a7d0 100644
--- a/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c
+++ b/Platform/ARM/Drivers/NorFlashDxe/NorFlash.c
@@ -807,135 +807,6 @@ NorFlashWriteSingleBlock (
return EFI_SUCCESS;
}
-/*
- Although DiskIoDxe will automatically install the DiskIO protocol whenever
- we install the BlockIO protocol, its implementation is sub-optimal as it
reads
- and writes entire blocks using the BlockIO protocol. In fact we can access
- NOR flash with a finer granularity than that, so we can improve performance
- by directly producing the DiskIO protocol.
-*/
-
-/**
- Read BufferSize bytes from Offset into Buffer.
-
- @param This Protocol instance pointer.
- @param MediaId Id of the media, changes every time the media
is replaced.
- @param Offset The starting byte offset to read from
- @param BufferSize Size of Buffer
- @param Buffer Buffer containing read data
-
- @retval EFI_SUCCESS The data was read correctly from the device.
- @retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The read request contains device addresses
that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoReadDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- OUT VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize,
&BlockOffset);
-
- return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
-}
-
-/**
- Writes a specified number of bytes to a device.
-
- @param This Indicates a pointer to the calling context.
- @param MediaId ID of the medium to be written.
- @param Offset The starting byte offset on the logical block I/O device
to write.
- @param BufferSize The size in bytes of Buffer. The number of bytes to write
to the device.
- @param Buffer A pointer to the buffer containing the data to be written.
-
- @retval EFI_SUCCESS The data was written correctly to the device.
- @retval EFI_WRITE_PROTECTED The device can not be written to.
- @retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
- @retval EFI_NO_MEDIA There is no media in the device.
- @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
- @retval EFI_INVALID_PARAMETER The write request contains device addresses
that are not
- valid for the device.
-
-**/
-EFI_STATUS
-EFIAPI
-NorFlashDiskIoWriteDisk (
- IN EFI_DISK_IO_PROTOCOL *This,
- IN UINT32 MediaId,
- IN UINT64 DiskOffset,
- IN UINTN BufferSize,
- IN VOID *Buffer
- )
-{
- NOR_FLASH_INSTANCE *Instance;
- UINT32 BlockSize;
- UINT32 BlockOffset;
- EFI_LBA Lba;
- UINTN RemainingBytes;
- UINTN WriteSize;
- EFI_STATUS Status;
-
- Instance = INSTANCE_FROM_DISKIO_THIS (This);
-
- if (MediaId != Instance->Media.MediaId) {
- return EFI_MEDIA_CHANGED;
- }
-
- BlockSize = Instance->Media.BlockSize;
- Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize,
&BlockOffset);
-
- RemainingBytes = BufferSize;
-
- // Write either all the remaining bytes, or the number of bytes that bring
- // us up to a block boundary, whichever is less.
- // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
- // block boundary (even if it is already on one).
- WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) -
DiskOffset);
-
- do {
- if (WriteSize == BlockSize) {
- // Write a full block
- Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize /
sizeof (UINT32));
- } else {
- // Write a partial block
- Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset,
&WriteSize, Buffer);
- }
-
- if (EFI_ERROR (Status)) {
- return Status;
- }
-
- // Now continue writing either all the remaining bytes or single blocks.
- RemainingBytes -= WriteSize;
- Buffer = (UINT8 *)Buffer + WriteSize;
- Lba++;
- BlockOffset = 0;
- WriteSize = MIN (RemainingBytes, BlockSize);
- } while (RemainingBytes);
-
- return Status;
-}
-
EFI_STATUS
NorFlashReset (
IN NOR_FLASH_INSTANCE *Instance
diff --git a/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
b/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
index 9d4732c6905a..9b8c76a171d4 100644
--- a/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
+++ b/Platform/ARM/Drivers/NorFlashDxe/NorFlashBlockIoDxe.c
@@ -121,3 +121,132 @@ NorFlashBlockIoFlushBlocks (
// Nothing to do so just return without error
return EFI_SUCCESS;
}
+
+/*
+ Although DiskIoDxe will automatically install the DiskIO protocol whenever
+ we install the BlockIO protocol, its implementation is sub-optimal as it
reads
+ and writes entire blocks using the BlockIO protocol. In fact we can access
+ NOR flash with a finer granularity than that, so we can improve performance
+ by directly producing the DiskIO protocol.
+*/
+
+/**
+ Read BufferSize bytes from Offset into Buffer.
+
+ @param This Protocol instance pointer.
+ @param MediaId Id of the media, changes every time the media
is replaced.
+ @param Offset The starting byte offset to read from
+ @param BufferSize Size of Buffer
+ @param Buffer Buffer containing read data
+
+ @retval EFI_SUCCESS The data was read correctly from the device.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing
the read.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
+ @retval EFI_INVALID_PARAMETER The read request contains device addresses
that are not
+ valid for the device.
+
+**/
+EFI_STATUS
+EFIAPI
+NorFlashDiskIoReadDisk (
+ IN EFI_DISK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 DiskOffset,
+ IN UINTN BufferSize,
+ OUT VOID *Buffer
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+ UINT32 BlockSize;
+ UINT32 BlockOffset;
+ EFI_LBA Lba;
+
+ Instance = INSTANCE_FROM_DISKIO_THIS (This);
+
+ if (MediaId != Instance->Media.MediaId) {
+ return EFI_MEDIA_CHANGED;
+ }
+
+ BlockSize = Instance->Media.BlockSize;
+ Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize,
&BlockOffset);
+
+ return NorFlashRead (Instance, Lba, BlockOffset, BufferSize, Buffer);
+}
+
+/**
+ Writes a specified number of bytes to a device.
+
+ @param This Indicates a pointer to the calling context.
+ @param MediaId ID of the medium to be written.
+ @param Offset The starting byte offset on the logical block I/O device
to write.
+ @param BufferSize The size in bytes of Buffer. The number of bytes to write
to the device.
+ @param Buffer A pointer to the buffer containing the data to be written.
+
+ @retval EFI_SUCCESS The data was written correctly to the device.
+ @retval EFI_WRITE_PROTECTED The device can not be written to.
+ @retval EFI_DEVICE_ERROR The device reported an error while performing
the write.
+ @retval EFI_NO_MEDIA There is no media in the device.
+ @retval EFI_MEDIA_CHANGED The MediaId does not match the current device.
+ @retval EFI_INVALID_PARAMETER The write request contains device addresses
that are not
+ valid for the device.
+
+**/
+EFI_STATUS
+EFIAPI
+NorFlashDiskIoWriteDisk (
+ IN EFI_DISK_IO_PROTOCOL *This,
+ IN UINT32 MediaId,
+ IN UINT64 DiskOffset,
+ IN UINTN BufferSize,
+ IN VOID *Buffer
+ )
+{
+ NOR_FLASH_INSTANCE *Instance;
+ UINT32 BlockSize;
+ UINT32 BlockOffset;
+ EFI_LBA Lba;
+ UINTN RemainingBytes;
+ UINTN WriteSize;
+ EFI_STATUS Status;
+
+ Instance = INSTANCE_FROM_DISKIO_THIS (This);
+
+ if (MediaId != Instance->Media.MediaId) {
+ return EFI_MEDIA_CHANGED;
+ }
+
+ BlockSize = Instance->Media.BlockSize;
+ Lba = (EFI_LBA)DivU64x32Remainder (DiskOffset, BlockSize,
&BlockOffset);
+
+ RemainingBytes = BufferSize;
+
+ // Write either all the remaining bytes, or the number of bytes that bring
+ // us up to a block boundary, whichever is less.
+ // (DiskOffset | (BlockSize - 1)) + 1) rounds DiskOffset up to the next
+ // block boundary (even if it is already on one).
+ WriteSize = MIN (RemainingBytes, ((DiskOffset | (BlockSize - 1)) + 1) -
DiskOffset);
+
+ do {
+ if (WriteSize == BlockSize) {
+ // Write a full block
+ Status = NorFlashWriteFullBlock (Instance, Lba, Buffer, BlockSize /
sizeof (UINT32));
+ } else {
+ // Write a partial block
+ Status = NorFlashWriteSingleBlock (Instance, Lba, BlockOffset,
&WriteSize, Buffer);
+ }
+
+ if (EFI_ERROR (Status)) {
+ return Status;
+ }
+
+ // Now continue writing either all the remaining bytes or single blocks.
+ RemainingBytes -= WriteSize;
+ Buffer = (UINT8 *)Buffer + WriteSize;
+ Lba++;
+ BlockOffset = 0;
+ WriteSize = MIN (RemainingBytes, BlockSize);
+ } while (RemainingBytes);
+
+ return Status;
+}
--
2.25.1
-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.
View/Reply Online (#118151): https://edk2.groups.io/g/devel/message/118151
Mute This Topic: https://groups.io/mt/105690936/21656
Group Owner: devel+ow...@edk2.groups.io
Unsubscribe: https://edk2.groups.io/g/devel/unsub [arch...@mail-archive.com]
-=-=-=-=-=-=-=-=-=-=-=-
