Juliano, I was able to create a mac version of this crcimg executable; I will add that to the Customizing nand wiki page along with the linux one. Are you working with a linux environment?
Kim On 9/8/07, Kim Quirk <[EMAIL PROTECTED]> wrote: > > Juliano, > Actually, Bernie ran the crcimg command for me but I was looking over his > shoulder and didn't see any error message. He ran it with the nand image I > provided and then I was able to successfully install this new image on a > laptop. > > Bernie - do you know anything about this error message? > > Thanks, > Kim > > On 9/8/07, Juliano Bittencourt < [EMAIL PROTECTED]> wrote: > > > > > > Hi Kim > > > > Did the image you created installed OK? > > I used your Crcimage.sh and obtained the same result as before. I was > > already using pilgrim to create the crc files. One think that I forgot > > to report is when I use the crcimage(pilgrim) command it's returning a > > message > > > > %crcimage nand.img > > Input file size is not a multiple of 0x20000 - residue 0x1e000 > > > > > > Is that normal? > > Thanks > > > > Kim Quirk escreveu: > > > Hi Juliano, > > > I just went through this process myself last night. > > > > > > The first time I did a save-nand it took many minutes. Unfortunately I > > > had to do it again since I missed a few things. The second time it > > > took many hours. It did complete (which surprised me). > > > > > > The next step, which is new since 406, is that you also have to create > > > a .crc file. > > > Scroll to the bottom of this page: > > > http://wiki.laptop.org/go/Customizing_NAND_images > > > <http://wiki.laptop.org/go/Customizing_NAND_images> > > > > > > I had to get someone to build the crc for me since I didn't have a > > > build environment. I tried to upload the crcimg program that runs on a > > > linux machine, but I had some issues with the wiki upload. I had to > > > give it an extension. If you have access to a linux machine you may be > > > > > able to create your own crc file with this: > > > http://wiki.laptop.org/go/Image:Crcimg.sh > > > > > > Tell me if it works and we can add the link directly to wiki page. If > > > someone creates a version that can run on a mac or on windows it would > > > be great to upload them here so those of us without build environments > > > could create crc files for custom images > > > Regards, > > > Kim > > > > > > > > > On 9/7/07, *Juliano Bittencourt* <[EMAIL PROTECTED] > > > <mailto:[EMAIL PROTECTED]>> wrote: > > > > > > > > > > > > Hi folks, > > > > > > I'm having problems using the save-nand OFW command to created > > a > > > customized version of the OS. In the near past I used this command > > > > > several times for this purpose, but now, it seems not working > > > anymore. > > > There are several symptoms: > > > > > > 1. When I try to create the image file with the command > > > 'save-nand > > > disk:\nand.os', the laptop starts working but the entire process > > takes > > > serveral hours to complete (about 5 hours) > > > 2. Even when the process completes successfully, eventually > > the > > > result is a 0 bites file; > > > 3. When the process is completed and the resulting file has > > about > > > 230mb, the problem is when I try to copy this file to a new > > > laptop. The > > > copy-nand command throws and error message : "Image file size is > > not a > > > multiple of the NAND erase block size". > > > > > > I repeated the process serveral times, on B2 and B3 machines > > with > > > firmware q2c23. Am I missing something or is this actually a bug? > > > > > > Best, > > > > > > Juliano Bittencourt > > > _______________________________________________ > > > Devel mailing list > > > Devel@lists.laptop.org <mailto:Devel@lists.laptop.org> > > > http://lists.laptop.org/listinfo/devel > > > > > > > > > > >
_______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel