Might try your Haiti 12.1 and see if you get similar.... Kg
Sent from my currently functioning gadget Original Message From: Tim Moody Sent: Monday, February 10, 2014 18:25 To: James Cameron Reply To: xsce-de...@googlegroups.com Cc: devel@lists.laptop.org; server-de...@lists.laptop.org; xsce-de...@googlegroups.com; support-g...@lists.laptop.org; unleashk...@googlegroups.com Subject: [XSCE] XO-1 wireless scan test Tim-1 VT MP02 SSID: TIM-UTIL-AP Channel: 9 MAC: A8:40:41:13:49:A8 Firmware: SECN v 2 RC3d router's dhcp server is on router's mesh is off no internet access 11 XO-1s with 12th a logger XO OS: Kevn Gordon custom based on 11.3, fc14 with Q2F19 ROM Each XO was powered on and connected to AP, which was visible in NN in each case, and then powered off. The 11 XOs were powered on in sequence and after all had connected to AP the 12th booted the scan logging software. After 1 hour the test was stopped and the linux test run. I don't think there were any misses. Additionally, after the test, the AP was changed to channel 1 and rebooted. All XOs connected to mesh-1. After the AP rebooted it was visible in all NN and all were manually connected to it successfully, though connection time as a little longer, or order of 10 seconds. I'll run another test on this channel tomorrow. _______________________________________________ Devel mailing list Devel@lists.laptop.org http://lists.laptop.org/listinfo/devel