On 02/04/2013 04:58 PM, Roger Quadros wrote:
> The PHY clock, clock rate, VCC regulator and RESET regulator
> can now be provided via device tree.
>
> Signed-off-by: Roger Quadros <rog...@ti.com>
> ---
> .../devicetree/bindings/usb/usb-nop-xceiv.txt | 34
> ++++++++++++++++++++
> drivers/usb/otg/nop-usb-xceiv.c | 31 ++++++++++++++++++
> 2 files changed, 65 insertions(+), 0 deletions(-)
> create mode 100644 Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
>
> diff --git a/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
> b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
> new file mode 100644
> index 0000000..d7e2726
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/usb/usb-nop-xceiv.txt
> @@ -0,0 +1,34 @@
> +USB NOP PHY
> +
> +Required properties:
> +- compatible: should be usb-nop-xceiv
> +
> +Optional properties:
> +- clocks: phandle to the PHY clock. Use as per Documentation/devicetree
> + /bindings/clock/clock-bindings.txt
> + This property is required if clock-frequency is specified.
> +
> +- clock-names: Should be "main_clk"
> +
> +- clock-frequency: the clock frequency (in Hz) that the PHY clock must
> + be configured to.
> +
> +- vcc-supply: phandle to the regulator that provides RESET to the PHY.
> +
> +- reset-supply: phandle to the regulator that provides power to the PHY.
> +
> +Example:
> +
> + hsusb1_phy {
> + compatible = "usb-nop-xceiv";
> + clock-frequency = <19200000>;Why do you hardcode the clock frequency here? You should use clk_get_rate() to get the frequency from the clock tree. Marc -- Pengutronix e.K. | Marc Kleine-Budde | Industrial Linux Solutions | Phone: +49-231-2826-924 | Vertretung West/Dortmund | Fax: +49-5121-206917-5555 | Amtsgericht Hildesheim, HRA 2686 | http://www.pengutronix.de |
signature.asc
Description: OpenPGP digital signature
_______________________________________________ devicetree-discuss mailing list devicetree-discuss@lists.ozlabs.org https://lists.ozlabs.org/listinfo/devicetree-discuss
