We no longer need to model a RESET line as a regulator since
we have the reset-gpio driver available.
Signed-off-by: Roger Quadros <rog...@ti.com>
---
arch/arm/boot/dts/omap3-beagle.dts | 17 ++++++++---------
1 files changed, 8 insertions(+), 9 deletions(-)
diff --git a/arch/arm/boot/dts/omap3-beagle.dts
b/arch/arm/boot/dts/omap3-beagle.dts
index dfd8310..01fbad6 100644
--- a/arch/arm/boot/dts/omap3-beagle.dts
+++ b/arch/arm/boot/dts/omap3-beagle.dts
@@ -45,14 +45,12 @@
};
/* HS USB Port 2 RESET */
- hsusb2_reset: hsusb2_reset_reg {
- compatible = "regulator-fixed";
- regulator-name = "hsusb2_reset";
- regulator-min-microvolt = <3300000>;
- regulator-max-microvolt = <3300000>;
- gpio = <&gpio5 19 0>; /* gpio_147 */
- startup-delay-us = <70000>;
- enable-active-high;
+ hsusb2_reset: hsusb2_reset {
+ compatible = "gpio-reset";
+ reset-gpios = <&gpio5 19 GPIO_ACTIVE_LOW>; /* gpio_147 */
+ reset-delay-us = <70000>;
+ initially-in-reset;
+ #reset-cells = <0>;
};
/* HS USB Port 2 Power */
@@ -68,7 +66,8 @@
/* HS USB Host PHY on PORT 2 */
hsusb2_phy: hsusb2_phy {
compatible = "usb-nop-xceiv";
- reset-supply = <&hsusb2_reset>;
+ resets = <&hsusb2_reset>;
+ reset-names = "reset";
vcc-supply = <&hsusb2_power>;
};
--
1.7.4.1
_______________________________________________
devicetree-discuss mailing list
devicetree-discuss@lists.ozlabs.org
https://lists.ozlabs.org/listinfo/devicetree-discuss
