On 20/06/2014 17:01, Boris BREZILLON wrote: > Add new atmel AIC (Advanced Interrupt Controller) driver based on the > generic chip infrastructure. > > This driver is only compatible with dt enabled board and replaces the old > implementation found in arch/arm/mach-at91/irq.c. > > Signed-off-by: Boris BREZILLON <boris.brezil...@free-electrons.com> > --- > drivers/irqchip/Kconfig | 7 + > drivers/irqchip/Makefile | 1 + > drivers/irqchip/irq-atmel-aic.c | 700 > ++++++++++++++++++++++++++++++++++++++++ > 3 files changed, 708 insertions(+) > create mode 100644 drivers/irqchip/irq-atmel-aic.c > > diff --git a/drivers/irqchip/Kconfig b/drivers/irqchip/Kconfig > index bbb746e..6a7ad81 100644 > --- a/drivers/irqchip/Kconfig > +++ b/drivers/irqchip/Kconfig > @@ -30,6 +30,13 @@ config ARM_VIC_NR > The maximum number of VICs available in the system, for > power management. > > +config ATMEL_AIC_IRQ > + bool > + select GENERIC_IRQ_CHIP > + select IRQ_DOMAIN > + select MULTI_IRQ_HANDLER > + select SPARSE_IRQ > +
I just though a bit about it and it might be better to split AIC and AIC5 support in 2 different drivers, because the AIC is only available on at91sam9/at91rm9200 SoCs and AIC5 only available on sama5 SoCs, and AFAICT there is no combination of both controller in a singler SoC. Jason, Thomas, let me know if you think this worth the trouble, and if so, should I keep a common implementation (in irq-atmel-aic-common.c/.h) for the shared functions/structures. Best Regards, Boris -- Boris Brezillon, Free Electrons Embedded Linux and Kernel engineering http://free-electrons.com -- To unsubscribe from this list: send the line "unsubscribe devicetree" in the body of a message to majord...@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html
