Enclose at91_aic_xx calls in IS_ENABLED(CONFIG_OLD_IRQ_AT91) blocks in
order to prepare migration to the new AIC driver.
In the new AIC driver the suspend/resume functions are called by the
generic irq framework and are no longer needed in the PM specific code.
Moreover, the new AIC driver no longer exposes the at91_aic_base variable
which is used by the at91_aic_read functions.
Signed-off-by: Boris BREZILLON <boris.brezil...@free-electrons.com>
Acked-by: Nicolas Ferre <nicolas.fe...@atmel.com>
---
arch/arm/mach-at91/pm.c | 32 ++++++++++++++++++++------------
arch/arm/mach-at91/setup.c | 3 ++-
2 files changed, 22 insertions(+), 13 deletions(-)
diff --git a/arch/arm/mach-at91/pm.c b/arch/arm/mach-at91/pm.c
index e955545..5920373 100644
--- a/arch/arm/mach-at91/pm.c
+++ b/arch/arm/mach-at91/pm.c
@@ -206,16 +206,19 @@ static int at91_pm_enter(suspend_state_t state)
at91_pinctrl_gpio_suspend();
else
at91_gpio_suspend();
- at91_irq_suspend();
- pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
- /* remember all the always-wake irqs */
- (at91_pmc_read(AT91_PMC_PCSR)
- | (1 << AT91_ID_FIQ)
- | (1 << AT91_ID_SYS)
- | (at91_get_extern_irq()))
- & at91_aic_read(AT91_AIC_IMR),
- state);
+ if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base) {
+ at91_irq_suspend();
+
+ pr_debug("AT91: PM - wake mask %08x, pm state %d\n",
+ /* remember all the always-wake irqs */
+ (at91_pmc_read(AT91_PMC_PCSR)
+ | (1 << AT91_ID_FIQ)
+ | (1 << AT91_ID_SYS)
+ | (at91_get_extern_irq()))
+ & at91_aic_read(AT91_AIC_IMR),
+ state);
+ }
switch (state) {
/*
@@ -280,12 +283,17 @@ static int at91_pm_enter(suspend_state_t state)
goto error;
}
- pr_debug("AT91: PM - wakeup %08x\n",
- at91_aic_read(AT91_AIC_IPR) &
at91_aic_read(AT91_AIC_IMR));
+ if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
+ pr_debug("AT91: PM - wakeup %08x\n",
+ at91_aic_read(AT91_AIC_IPR) &
+ at91_aic_read(AT91_AIC_IMR));
error:
target_state = PM_SUSPEND_ON;
- at91_irq_resume();
+
+ if (IS_ENABLED(CONFIG_OLD_IRQ_AT91) && at91_aic_base)
+ at91_irq_resume();
+
if (of_have_populated_dt())
at91_pinctrl_gpio_resume();
else
diff --git a/arch/arm/mach-at91/setup.c b/arch/arm/mach-at91/setup.c
index f7a07a5..0bf893a 100644
--- a/arch/arm/mach-at91/setup.c
+++ b/arch/arm/mach-at91/setup.c
@@ -49,7 +49,8 @@ void __init at91_init_irq_default(void)
void __init at91_init_interrupts(unsigned int *priority)
{
/* Initialize the AIC interrupt controller */
- at91_aic_init(priority, at91_boot_soc.extern_irq);
+ if (IS_ENABLED(CONFIG_OLD_IRQ_AT91))
+ at91_aic_init(priority, at91_boot_soc.extern_irq);
/* Enable GPIO interrupts */
at91_gpio_irq_setup();
--
1.8.3.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
