The DT bindings in exynos-adc.txt applies to the ADC
driver (exynos-adc.c) developed based on IIO framework.
The bindings are more appropriate to be under
Documentation/devicetree/bindings/iio/adc/
Signed-off-by: Naveen Krishna Chatradhi <ch.nav...@samsung.com>
To: devicetree@vger.kernel.org
---
.../devicetree/bindings/arm/samsung/exynos-adc.txt | 82 --------------------
.../devicetree/bindings/iio/adc/exynos-adc.txt | 82 ++++++++++++++++++++
2 files changed, 82 insertions(+), 82 deletions(-)
delete mode 100644 Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
create mode 100644 Documentation/devicetree/bindings/iio/adc/exynos-adc.txt
diff --git a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
b/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
deleted file mode 100644
index b87749a..0000000
--- a/Documentation/devicetree/bindings/arm/samsung/exynos-adc.txt
+++ /dev/null
@@ -1,82 +0,0 @@
-Samsung Exynos Analog to Digital Converter bindings
-
-The devicetree bindings are for the new ADC driver written for
-Exynos4 and upward SoCs from Samsung.
-
-New driver handles the following
-1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
- and future SoCs from Samsung
-2. Add ADC driver under iio/adc framework
-3. Also adds the Documentation for device tree bindings
-
-Required properties:
-- compatible: Must be "samsung,exynos-adc-v1"
- for exynos4412/5250 controllers.
- Must be "samsung,exynos-adc-v2" for
- future controllers.
- Must be "samsung,exynos3250-adc-v2" for
- for controllers compatible with ADC of
- Exynos3250.
-- reg: Contains ADC register address range (base address and
- length) and the address of the phy enable register.
-- interrupts: Contains the interrupt information for the timer. The
- format is being dependent on which interrupt controller
- the Samsung device uses.
-- #io-channel-cells = <1>; As ADC has multiple outputs
-- clocks From common clock bindings: handles to clocks specified
- in "clock-names" property, in the same order.
-- clock-names From common clock bindings: list of clock input names
- used by ADC block:
- - "adc" : ADC bus clock
- - "sclk_adc" : ADC special clock (only for Exynos3250
- and compatible ADC block)
-- vdd-supply VDD input supply.
-
-Note: child nodes can be added for auto probing from device tree.
-
-Example: adding device info in dtsi file
-
-adc: adc@12D10000 {
- compatible = "samsung,exynos-adc-v1";
- reg = <0x12D10000 0x100>, <0x10040718 0x4>;
- interrupts = <0 106 0>;
- #io-channel-cells = <1>;
- io-channel-ranges;
-
- clocks = <&clock 303>;
- clock-names = "adc";
-
- vdd-supply = <&buck5_reg>;
-};
-
-Example: adding device info in dtsi file for Exynos3250 with additional sclk
-
-adc: adc@126C0000 {
- compatible = "samsung,exynos3250-adc-v2";
- reg = <0x126C0000 0x100>, <0x10020718 0x4>;
- interrupts = <0 137 0>;
- #io-channel-cells = <1>;
- io-channel-ranges;
-
- clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
- clock-names = "adc", "sclk_adc";
-
- vdd-supply = <&buck5_reg>;
-};
-
-Example: Adding child nodes in dts file
-
-adc@12D10000 {
-
- /* NTC thermistor is a hwmon device */
- ncp15wb473@0 {
- compatible = "ntc,ncp15wb473";
- pullup-uv = <1800000>;
- pullup-ohm = <47000>;
- pulldown-ohm = <0>;
- io-channels = <&adc 4>;
- };
-};
-
-Note: Does not apply to ADC driver under arch/arm/plat-samsung/
-Note: The child node can be added under the adc node or separately.
diff --git a/Documentation/devicetree/bindings/iio/adc/exynos-adc.txt
b/Documentation/devicetree/bindings/iio/adc/exynos-adc.txt
new file mode 100644
index 0000000..b87749a
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/adc/exynos-adc.txt
@@ -0,0 +1,82 @@
+Samsung Exynos Analog to Digital Converter bindings
+
+The devicetree bindings are for the new ADC driver written for
+Exynos4 and upward SoCs from Samsung.
+
+New driver handles the following
+1. Supports ADC IF found on EXYNOS4412/EXYNOS5250
+ and future SoCs from Samsung
+2. Add ADC driver under iio/adc framework
+3. Also adds the Documentation for device tree bindings
+
+Required properties:
+- compatible: Must be "samsung,exynos-adc-v1"
+ for exynos4412/5250 controllers.
+ Must be "samsung,exynos-adc-v2" for
+ future controllers.
+ Must be "samsung,exynos3250-adc-v2" for
+ for controllers compatible with ADC of
+ Exynos3250.
+- reg: Contains ADC register address range (base address and
+ length) and the address of the phy enable register.
+- interrupts: Contains the interrupt information for the timer. The
+ format is being dependent on which interrupt controller
+ the Samsung device uses.
+- #io-channel-cells = <1>; As ADC has multiple outputs
+- clocks From common clock bindings: handles to clocks specified
+ in "clock-names" property, in the same order.
+- clock-names From common clock bindings: list of clock input names
+ used by ADC block:
+ - "adc" : ADC bus clock
+ - "sclk_adc" : ADC special clock (only for Exynos3250
+ and compatible ADC block)
+- vdd-supply VDD input supply.
+
+Note: child nodes can be added for auto probing from device tree.
+
+Example: adding device info in dtsi file
+
+adc: adc@12D10000 {
+ compatible = "samsung,exynos-adc-v1";
+ reg = <0x12D10000 0x100>, <0x10040718 0x4>;
+ interrupts = <0 106 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clocks = <&clock 303>;
+ clock-names = "adc";
+
+ vdd-supply = <&buck5_reg>;
+};
+
+Example: adding device info in dtsi file for Exynos3250 with additional sclk
+
+adc: adc@126C0000 {
+ compatible = "samsung,exynos3250-adc-v2";
+ reg = <0x126C0000 0x100>, <0x10020718 0x4>;
+ interrupts = <0 137 0>;
+ #io-channel-cells = <1>;
+ io-channel-ranges;
+
+ clocks = <&cmu CLK_TSADC>, <&cmu CLK_SCLK_TSADC>;
+ clock-names = "adc", "sclk_adc";
+
+ vdd-supply = <&buck5_reg>;
+};
+
+Example: Adding child nodes in dts file
+
+adc@12D10000 {
+
+ /* NTC thermistor is a hwmon device */
+ ncp15wb473@0 {
+ compatible = "ntc,ncp15wb473";
+ pullup-uv = <1800000>;
+ pullup-ohm = <47000>;
+ pulldown-ohm = <0>;
+ io-channels = <&adc 4>;
+ };
+};
+
+Note: Does not apply to ADC driver under arch/arm/plat-samsung/
+Note: The child node can be added under the adc node or separately.
--
1.7.9.5
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majord...@vger.kernel.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
