This software comes without warranty. Use at your own risk. It should work for (4.x and 5.x servers)
To install the SquidGuard Panel, you must access the server in console mode. This means plugging in a keyboard and mouse into the back of your server or you can also use SSH to remotely install the software as well. >From the console mode, access the command prompt by holding down your ALT key and pressing "F2". Log in as "root" <press enter> and type your system password when prompted. Enter these commands from the prompt: mkdir /sg3 cd /sg3 wget ftp://ftp.e-smith.com/pub/e-smith/contrib/TrevorOuellette/squidguard30.tar.g z tar -zxf squidguard30.tar.gz ./install.sh You will now have to reboot your server. You can do this from the command line console by typing in "reboot" and pressing enter. You will be able to access the interface from your server-manager. Trev. -- Please report bugs to [EMAIL PROTECTED] Please mail [EMAIL PROTECTED] (only) to discuss security issues Support for registered customers and partners to [EMAIL PROTECTED] To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] Archives by mail and http://www.mail-archive.com/devinfo%40lists.e-smith.org