Hi Kevin, You are using OLD software, you want the latest PC-ALE v1.062H Interim Build #5 which is found at the HFlink Yahoo forum.
/s/ Steve, N2CKH At 11:02 AM 10/14/2007, you wrote: >Steve Hajducek wrote: > > Hi Kevin, > > > > If you select by model number from "Radio Type" you want your radio > > to be using the factory address and 19200 baud. > > > > If you use GENERIC ICOM, which I don't recommend, then you want to > > use the baud radio your is set to 8N1, the radio address your radio > > is set. Don't both checking SPLIT VFO as your model is not going to > > benefit from it due to its design. > > > > I say never use AUTOBAUD and keep INFORMATION set to OFF. > > > > /s/ Steve, N2CKH > > > >