On Sun, May 2, 2010 at 2:30 PM, Scott Lambert <lamb...@lambertfam.org> wrote: > On Sun, May 02, 2010 at 01:03:50PM +0200, Eugen Leitl wrote: >> I'm attempting to simulate a production network 88.198.238.112/28 >> with gateway 88.198.238.113 on the OPT1 interface (set to 88.198.238.113) >> but I'm too dense to figure out how override the default route, which sends >> the packet to WAN. >> >> I obviously need to do something along the lines of >> route add -net 88.198.238.112/28 88.198.238.113 > > No, I believe you have what you want simply by specifying the IP and > netmask on the the OPT1 interface. If there is a subnet other than > 88.198.248.112/28 which you want to speak to across the OPT1 interface, > you may want to specify the gateway, on the OPT1 interface, of the > router which knows how to speak to that other subnet. Then you would > add a static route. >
Exactly that. If you have OPT1 configured with that subnet, and traffic to that destination subnet is going out WAN, then you probably haven't enabled OPT1 or have its IP info wrong or maybe don't have that NIC plugged in. --------------------------------------------------------------------- To unsubscribe, e-mail: discussion-unsubscr...@pfsense.com For additional commands, e-mail: discussion-h...@pfsense.com Commercial support available - https://portal.pfsense.org
