On 12/06/2017 12:27 PM, Noralf Trønnes wrote:
Den 29.11.2017 04.01, skrev David Lechner:
This adds a new driver for Sitronix ST7735R display panels.
This has been tested using an Adafruit 1.8" TFT.
Signed-off-by: David Lechner <da...@lechnology.com>
---
MAINTAINERS | 6 +
drivers/gpu/drm/tinydrm/Kconfig | 10 ++
drivers/gpu/drm/tinydrm/Makefile | 1 +
drivers/gpu/drm/tinydrm/st7735r.c | 237
++++++++++++++++++++++++++++++++++++++
4 files changed, 254 insertions(+)
create mode 100644 drivers/gpu/drm/tinydrm/st7735r.c
diff --git a/MAINTAINERS b/MAINTAINERS
index a174632..9c7707e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -4462,6 +4462,12 @@ S: Maintained
F: drivers/gpu/drm/tinydrm/st7586.c
F: Documentation/devicetree/bindings/display/st7586.txt
+DRM DRIVER FOR SITRONIX ST7735R PANELS
+M: David Lechner <da...@lechnology.com>
I know we haven't done this in the other tinydrm drivers, but I think
we should start adding which tree the development is happening in:
T: git git://anongit.freedesktop.org/drm/drm-misc
This is inherited, just like L:, so get_maintainers.pl --scm returns git
git://anongit.freedesktop.org/drm/drm-misc already. So there doesn't
seem to be a need to add this line.
+S: Maintained
+F: drivers/gpu/drm/tinydrm/st7735r.c
+F: Documentation/devicetree/bindings/display/st7735r.txt
<snip>
+}
+
+static void st7735r_pipe_disable(struct drm_simple_display_pipe *pipe)
+{
+ struct tinydrm_device *tdev = pipe_to_tinydrm(pipe);
+ struct mipi_dbi *mipi = mipi_dbi_from_tinydrm(tdev);
+
Please use mipi_dbi_pipe_disable() here.
+ DRM_DEBUG_KMS("\n");
+
+ if (!mipi->enabled)
+ return;
+
+ tinydrm_disable_backlight(mipi->backlight);
+
+ mipi_dbi_command(mipi, MIPI_DCS_SET_DISPLAY_OFF);
You turn off the panel, have you checked what it looks like if you don't
turn off backlight (which is optional in this driver)?
On the displays I have tried this on, all pixels turn white when they're
not driven, letting backlight through, giving an all white display.
That's why I have that blanking code in mipi_dbi_pipe_disable() when we
don't have backlight control and the reason I don't turn off the panel.
The power savings of not driving the panel is negligible AFAICR.
If you don't need DISPLAY_OFF, you can just use mipi_dbi_pipe_disable()
directly as the callback.
I tested this and you are right, it causes the panel to go white when a
backlight is not specified, so I will just use mipi_dbi_pipe_disable().
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
