On 9/18/2023 5:58 AM, John Watts wrote:
The current code waits after resets for 5 to 20 milliseconds.
This is appropriate when resetting a sleeping panel, but an awake panel
requires at least 120ms of waiting.
Sleep for 150ms so the panel always completes it reset properly.
Signed-off-by: John Watts <cont...@jookia.org>
Hi John,
Just wondering, is there some context to this change? I.e., was this
made to fix a specific issue?
This seems like a pretty significant increase in wait time so, if it's
not a fix, I'm not sure if this would be an improvement on the current
behavior.
Thanks,
Jessica Zhang
---
drivers/gpu/drm/panel/panel-newvision-nv3052c.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
index 90dea21f9856..2526b123b1f5 100644
--- a/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
+++ b/drivers/gpu/drm/panel/panel-newvision-nv3052c.c
@@ -258,7 +258,7 @@ static int nv3052c_prepare(struct drm_panel *panel)
gpiod_set_value_cansleep(priv->reset_gpio, 1);
usleep_range(10, 1000);
gpiod_set_value_cansleep(priv->reset_gpio, 0);
- usleep_range(5000, 20000);
+ msleep(150);
for (i = 0; i < ARRAY_SIZE(nv3052c_panel_regs); i++) {
err = mipi_dbi_command(dbi, nv3052c_panel_regs[i].cmd,
--
2.42.0
