[PATCH 3/6] drm/panel: novatek-nt36672e: stop setting register load before disable

[Dmitry Baryshkov]

It is pointless to set register load before disabling the register. This
vote is going to be dropped as soon as the register is disabled. Drop
these register_set_load calls.

Signed-off-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
---
 drivers/gpu/drm/panel/panel-novatek-nt36672e.c | 17 -----------------
 1 file changed, 17 deletions(-)

diff --git a/drivers/gpu/drm/panel/panel-novatek-nt36672e.c 
b/drivers/gpu/drm/panel/panel-novatek-nt36672e.c
index c39fe0fc5d69..9a870b9b6765 100644
--- a/drivers/gpu/drm/panel/panel-novatek-nt36672e.c
+++ b/drivers/gpu/drm/panel/panel-novatek-nt36672e.c
@@ -25,12 +25,6 @@ static const unsigned long regulator_enable_loads[] = {
        100000,
 };
 
-static const unsigned long regulator_disable_loads[] = {
-       80,
-       100,
-       100,
-};
-
 struct panel_desc {
        const struct drm_display_mode *display_mode;
        u32 width_mm;
@@ -385,20 +379,9 @@ static int nt36672e_power_off(struct nt36672e_panel *ctx)
 {
        struct mipi_dsi_device *dsi = ctx->dsi;
        int ret = 0;
-       int i;
 
        gpiod_set_value(ctx->reset_gpio, 0);
 
-       for (i = 0; i < ARRAY_SIZE(ctx->supplies); i++) {
-               ret = regulator_set_load(ctx->supplies[i].consumer,
-                               regulator_disable_loads[i]);
-               if (ret) {
-                       dev_err(&dsi->dev, "regulator set load failed for 
supply %s: %d\n",
-                               ctx->supplies[i].supply, ret);
-                       return ret;
-               }
-       }
-
        ret = regulator_bulk_disable(ARRAY_SIZE(ctx->supplies), ctx->supplies);
        if (ret)
                dev_err(&dsi->dev, "regulator bulk disable failed: %d\n", ret);

-- 
2.39.2