On Mon, 13 May 2024 at 10:55, Liu Ying <victor....@nxp.com> wrote:
>
> The connector is created by either this ADV7511 bridge driver or
> any DRM device driver/previous bridge driver, so this ADV7511
> bridge driver should not let the next bridge driver create connector.
>
> If the next bridge is a HDMI connector, the next bridge driver
> would fail to attach bridge from display_connector_attach() without
> the DRM_BRIDGE_ATTACH_NO_CONNECTOR flag.
>
> Add that flag to drm_bridge_attach() function call in
> adv7511_bridge_attach() to fix the issue.
>
> This fixes the issue where the HDMI connector bridge fails to attach
> to the previous ADV7535 bridge on i.MX8MP EVK platform:
>
> [ 2.216442] [drm:drm_bridge_attach] *ERROR* failed to attach bridge
> /hdmi-connector to encoder None-37: -22
> [ 2.220675] mmc1: SDHCI controller on 30b50000.mmc [30b50000.mmc] using
> ADMA
> [ 2.226262] [drm:drm_bridge_attach] *ERROR* failed to attach bridge
> /soc@0/bus@30800000/i2c@30a30000/hdmi@3d to encoder None-37: -22
> [ 2.245204] [drm:drm_bridge_attach] *ERROR* failed to attach bridge
> /soc@0/bus@32c00000/dsi@32e60000 to encoder None-37: -22
> [ 2.256445] imx-lcdif 32e80000.display-controller: error -EINVAL: Failed
> to attach bridge for endpoint0
> [ 2.265850] imx-lcdif 32e80000.display-controller: error -EINVAL: Cannot
> connect bridge
> [ 2.274009] imx-lcdif 32e80000.display-controller: probe with driver
> imx-lcdif failed with error -22
>
> Fixes: 14b3cdbd0e5b ("drm/bridge: adv7511: make it honour next bridge in DT")
> Signed-off-by: Liu Ying <victor....@nxp.com>
> ---
> drivers/gpu/drm/bridge/adv7511/adv7511_drv.c | 3 ++-
> 1 file changed, 2 insertions(+), 1 deletion(-)
>
Reviewed-by: Dmitry Baryshkov <dmitry.barysh...@linaro.org>
--
With best wishes
Dmitry
