[PATCH 1/3] gma500: Prevent endless loop in panel power up sequence

[Alan Cox]

From: Alan Cox <a...@linux.intel.com>

Some devices don't have a panel connected to LVDS and thus will never power up.
This patch checks the power sequence progress bits in PP_STATUS to prevent an
endless loop on such devices.

Signed-off-by: Patrik Jakobsson <patrik.r.jakobsson at gmail.com>
Signed-off-by: Alan Cox <alan at linux.intel.com>
---

 drivers/gpu/drm/gma500/psb_lid.c |   12 +++++++++---
 1 files changed, 9 insertions(+), 3 deletions(-)

diff --git a/drivers/gpu/drm/gma500/psb_lid.c b/drivers/gpu/drm/gma500/psb_lid.c
index 7ff8bb2b..1d2ebb5 100644
--- a/drivers/gpu/drm/gma500/psb_lid.c
+++ b/drivers/gpu/drm/gma500/psb_lid.c
@@ -40,10 +40,16 @@ static void psb_lid_timer_func(unsigned long data)
                REG_WRITE(PP_CONTROL, REG_READ(PP_CONTROL) | POWER_TARGET_ON);
                do {
                        pp_status = REG_READ(PP_STATUS);
-               } while ((pp_status & PP_ON) == 0);
+               } while ((pp_status & PP_ON) == 0 &&
+                        (pp_status & PP_SEQUENCE_MASK) != 0);

-               /*FIXME: should be backlight level before*/
-               psb_intel_lvds_set_brightness(dev, 100);
+               if (REG_READ(PP_STATUS) & PP_ON) {
+                       /*FIXME: should be backlight level before*/
+                       psb_intel_lvds_set_brightness(dev, 100);
+               } else {
+                       DRM_DEBUG("LVDS panel never powered up");
+                       return;
+               }
        } else {
                psb_intel_lvds_set_brightness(dev, 0);