Please do not reply to this email: if you want to comment on the bug, go to
the URL shown below and enter your comments there.
http://bugs.xfree86.org/show_bug.cgi?id=314
------- Additional Comments From [EMAIL PROTECTED] 2003-28-08 16:31 -------
Ok, so I compiled 2.6.0-test4-mm2 w/ patch #540 and xfree 4.3.99-10. Everything
applied and compiled just fine. I go to startup X and I get this...
agpgart: Detected Ati IGP330/340/345/350/M chipset
agpgart: Maximum main memory to use for agp memory: 380M
agpgart: AGP aperture is 64M @ 0xe4000000
[drm] Initialized radeon 1.9.0 20020828 on minor 0
Linux sonic 2.6.0-test4-mm2 #3 Wed Aug 27 23:10:29 PDT 2003 i686 Mobile Intel
(R) Celeron(R) CPU 1.60GHz GenuineIntel GNU/Linux
(--) Chipset ATI Radeon IGP330M/340M/350M (U2) 4337 found
(II) RADEON(0): vgaHWGetIOBase: hwp->IOBase is 0x03d0, hwp->PIOOffset is 0x0000
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPFastWrite" "on"
(**) RADEON(0): Option "EnablePageFlip" "on"
(--) RADEON(0): Chipset: "ATI Radeon IGP330M/340M/350M (U2) 4337" (ChipID =
0x4337)
(**) RADEON(0): Using AGP 4x mode
(**) RADEON(0): Enabling AGP Fast Write
(II) RADEON(0): Depth moves disabled by default
(WW) RADEON(0): Failed to set up write-combining range (0xe8000000,0x4000000)
(WW) RADEON(0): Direct rendering not yet supported on IGP320/330/340/350, 7000,
9000 integrated chips
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7413
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): Direct rendering disabled
Relevent part of XF86Config
Section "Device"
Identifier "ATI IGP 340m"
Driver "radeon"
Option "DPMS"
Option "AGPMode" "4"
Option "AGPFastWrite" "on"
Option "EnablePageFlip" "on"
BusID "PCI:1:5:0"
EndSection
--
Configure bugmail: http://bugs.xfree86.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This sf.net email is sponsored by:ThinkGeek
Welcome to geek heaven.
http://thinkgeek.com/sf
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
