Please do not reply to this email: if you want to comment on the bug, go to
the URL shown below and enter your comments there.
http://bugs.xfree86.org/show_bug.cgi?id=314
------- Additional Comments From [EMAIL PROTECTED] 2003-26-10 21:01 -------
Running kernel 2.6.0-test7 with patch #706 (compiled in atm, but no speed diff)
Running XFree86 4.3.99-14 with patch #723 (installed with make World && su -c
"make install"; XFree86 -version gets proper one though)
I can get DRI working (tuxracer works great, glxgears up to ~200, nwn ~3fps
tops). Glxgears without dri are about ~180-220, but CPU usage makes it obvious
that dri does in fact work in the former case. Preemtive option in the kernel
makes no difference.
At one point in the past, I had X saying that dri was enabled in my logs and
glxinfo claiming it was not (should be unrelated to this though). This line in
particular I think might indicate the problem, but most references refered to it
as a 2D problem: "(WW) RADEON(0): Failed to set up write-combining range
(0xe0000000,0x4000000)". Also, I get a "disabling TCL support" in whatever
terminal I try to run an app that uses OpenGL. KDE also crashes near the end of
it's startup, so I'm using IceWM atm (noticed that this seems to be kernel
dependant behavior but not yet narrowed down the cause).
The base distro I started with is Mandrake 9.2 download edition. The hardware
is a Compaq 2100 series (AMD Mobile 2200+, 512MB ram, 320M graphics).
from dmsg:
*******************************************
Linux agpgart interface v0.100 (c) Dave Jones
agpgart: Detected Ati IGP320/M chipset
agpgart: Maximum main memory to use for agp memory: 379M
agpgart: AGP aperture is 64M @ 0xd4000000
[drm] Initialized radeon 1.9.0 20020828 on minor 0
from /etc/X11/XF86Config-4
*******************************************
dri, glx, etc all enabled higher up
....
Section "Device"
Identifier "device1"
VendorName "ATI Technologies Inc"
BoardName "Radeon Mobility U1"
Driver "radeon"
Option "AGPMode" "4"
Option "AGPFastWrite" "True"
# Option "EnablePageFlip" "True" #makes no speed difference
Option "DPMS"
from /var/log/XFree86.0.log
****************************************
(II) RADEON(0): PCI bus 1 card 5 func 0
(**) RADEON(0): Depth 16, (--) framebuffer bpp 16
(II) RADEON(0): Pixel depth = 16 bits stored in 2 bytes (16 bpp pixmaps)
(==) RADEON(0): Default visual is TrueColor
(**) RADEON(0): Option "AGPMode" "4"
(**) RADEON(0): Option "AGPFastWrite" "True"
(==) RADEON(0): RGB weight 565
(II) RADEON(0): Using 6 bits per RGB (8 bit DAC)
(II) Loading sub module "int10"
(II) LoadModule: "int10"
(II) Loading /usr/X11R6/lib/modules/linux/libint10.a
(II) Module int10: vendor="The XFree86 Project"
compiled for 4.3.99.14, module version = 1.0.0
ABI class: XFree86 Video Driver, version 0.7
(II) RADEON(0): initializing int10
(II) RADEON(0): Primary V_BIOS segment is: 0xc000
(--) RADEON(0): Chipset: "ATI Radeon IGP320M (U1) 4336" (ChipID = 0x4336)
(--) RADEON(0): Linear framebuffer at 0xe0000000
(--) RADEON(0): VideoRAM: 65536 kByte (64 bit DDR SDRAM)
(II) RADEON(0): AGP card detected
...
(II) RADEON(0): Page flipping disabled
(!!) RADEON(0): For information on using the multimedia capabilities
of this adapter, please see http://gatos.sf.net.
...
(WW) RADEON(0): Failed to set up write-combining range (0xe0000000,0x4000000)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmOpenDevice: minor is 0
drmOpenDevice: node name is /dev/dri/card0
drmOpenDevice: open result is 6, (OK)
drmGetBusid returned ''
(II) RADEON(0): [drm] created "radeon" driver at busid "PCI:1:5:0"
(II) RADEON(0): [drm] added 8192 byte SAREA at 0xdd929000
(II) RADEON(0): [drm] mapped SAREA 0xdd929000 to 0x44269000
(II) RADEON(0): [drm] framebuffer handle = 0xe0000000
(II) RADEON(0): [drm] added 1 reserved context for kernel
(II) RADEON(0): [agp] Mode 0x0f000214 [AGP 0x1002/0xcab0; Card 0x1002/0x4336]
(II) RADEON(0): [agp] 8192 kB allocated with handle 0x00000001
(II) RADEON(0): [agp] ring handle = 0xd4000000
(II) RADEON(0): [agp] Ring mapped at 0x4426b000
(II) RADEON(0): [agp] ring read ptr handle = 0xd4101000
(II) RADEON(0): [agp] Ring read ptr mapped at 0x4436c000
(II) RADEON(0): [agp] vertex/indirect buffers handle = 0xd4102000
(II) RADEON(0): [agp] Vertex/indirect buffers mapped at 0x4436d000
(II) RADEON(0): [agp] GART texture map handle = 0xd4302000
(II) RADEON(0): [agp] GART Texture map mapped at 0x4456d000
(II) RADEON(0): [drm] register handle = 0xd0100000
(II) RADEON(0): [dri] Visual configs initialized
(II) RADEON(0): CP in BM mode
(II) RADEON(0): Using 8 MB GART aperture
(II) RADEON(0): Using 1 MB for the ring buffer
(II) RADEON(0): Using 2 MB for vertex/indirect buffers
(II) RADEON(0): Using 5 MB for GART textures
(II) RADEON(0): Memory manager initialized to (0,0) (1024,8191)
(II) RADEON(0): Reserved area from (0,768) to (1024,770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7421
(II) RADEON(0): Will use back buffer at offset 0x600000
(II) RADEON(0): Will use depth buffer at offset 0x780000
(II) RADEON(0): Will use 56320 kb for textures at offset 0x900000
(II) RADEON(0): Using XFree86 Acceleration Architecture (XAA)
Screen to screen bit blits
Solid filled rectangles
8x8 mono pattern filled rectangles
Indirect CPU to Screen color expansion
Solid Lines
Dashed Lines
Scanline Image Writes
Offscreen Pixmaps
Setting up tile and stipple cache:
32 128x128 slots
32 256x256 slots
16 512x512 slots
(II) RADEON(0): Acceleration enabled
(==) RADEON(0): Backing store disabled
(==) RADEON(0): Silken mouse enabled
(II) RADEON(0): Using hardware cursor (scanline 770)
(II) RADEON(0): Largest offscreen area available: 1024 x 7413
(**) Option "dpms"
(**) RADEON(0): DPMS enabled
(II) RADEON(0): X context handle = 0x00000001
(II) RADEON(0): [drm] installed DRM signal handler
(II) RADEON(0): [DRI] installation complete
(II) RADEON(0): [drm] Added 32 65536 byte vertex/indirect buffers
(II) RADEON(0): [drm] Mapped 32 vertex/indirect buffers
(II) RADEON(0): [drm] dma control initialized, using IRQ 9
(II) RADEON(0): [drm] Initialized kernel GART heap manager, 5111808
(II) RADEON(0): Direct rendering enabled
(==) RandR enabled
glxinfo output
***********************************
name of display: :0.0
display: :0 screen: 0
direct rendering: Yes
server glx vendor string: SGI
server glx version string: 1.2
server glx extensions:
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_EXT_import_context,
GLX_SGI_make_current_read
client glx vendor string: SGI
client glx version string: 1.2
client glx extensions:
GLX_ARB_get_proc_address, GLX_ARB_multisample, GLX_EXT_import_context,
GLX_EXT_visual_info, GLX_EXT_visual_rating, GLX_MESA_allocate_memory,
GLX_MESA_swap_control, GLX_MESA_swap_frame_usage, GLX_OML_swap_method,
GLX_OML_sync_control, GLX_SGI_make_current_read, GLX_SGI_swap_control,
GLX_SGI_video_sync, GLX_SGIS_multisample, GLX_SGIX_fbconfig,
GLX_SGIX_visual_select_group
GLX extensions:
GLX_ARB_get_proc_address, GLX_EXT_import_context, GLX_EXT_visual_info,
GLX_EXT_visual_rating, GLX_MESA_swap_control, GLX_MESA_swap_frame_usage,
GLX_SGI_video_sync
OpenGL vendor string: Tungsten Graphics, Inc.
OpenGL renderer string: Mesa DRI Radeon 20030328 AGP 4x x86/MMX+/3DNow!+/SSENO-TCL
OpenGL version string: 1.2 Mesa 5.0.2
OpenGL extensions:
GL_ARB_imaging, GL_ARB_multisample, GL_ARB_multitexture,
GL_ARB_texture_border_clamp, GL_ARB_texture_compression,
GL_ARB_texture_env_add, GL_ARB_texture_env_combine,
GL_ARB_texture_env_dot3, GL_ARB_texture_mirrored_repeat,
GL_ARB_transpose_matrix, GL_ARB_window_pos, GL_EXT_abgr, GL_EXT_bgra,
GL_EXT_blend_color, GL_EXT_blend_logic_op, GL_EXT_blend_minmax,
GL_EXT_blend_subtract, GL_EXT_clip_volume_hint,
GL_EXT_compiled_vertex_array, GL_EXT_convolution, GL_EXT_copy_texture,
GL_EXT_draw_range_elements, GL_EXT_histogram, GL_EXT_packed_pixels,
GL_EXT_polygon_offset, GL_EXT_rescale_normal, GL_EXT_secondary_color,
GL_EXT_separate_specular_color, GL_EXT_subtexture, GL_EXT_texture,
GL_EXT_texture3D, GL_EXT_texture_edge_clamp, GL_EXT_texture_env_add,
GL_EXT_texture_env_combine, GL_EXT_texture_env_dot3,
GL_EXT_texture_filter_anisotropic, GL_EXT_texture_object,
GL_EXT_texture_lod_bias, GL_EXT_vertex_array, GL_APPLE_packed_pixels,
GL_ATI_texture_env_combine3, GL_ATI_texture_mirror_once,
GL_IBM_rasterpos_clip, GL_IBM_texture_mirrored_repeat,
GL_MESA_ycbcr_texture, GL_MESA_window_pos, GL_NV_blend_square,
GL_NV_texture_rectangle, GL_NV_texgen_reflection, GL_SGI_color_matrix,
GL_SGI_color_table, GL_SGIS_generate_mipmap, GL_SGIS_texture_border_clamp,
GL_SGIS_texture_edge_clamp, GL_SGIS_texture_lod
glu version: 1.3
glu extensions:
GLU_EXT_nurbs_tessellator, GLU_EXT_object_space_tess
visual x bf lv rg d st colorbuffer ax dp st accumbuffer ms cav
id dep cl sp sz l ci b ro r g b a bf th cl r g b a ns b eat
----------------------------------------------------------------------
0x23 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x24 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 None
0x25 16 tc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x26 16 tc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x27 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x28 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 None
0x29 16 tc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2a 16 tc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2b 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x2c 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 0 0 0 0 0 0 None
0x2d 16 dc 0 16 0 r . . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x2e 16 dc 0 16 0 r . . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
0x2f 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 0 0 0 0 0 0 None
0x30 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 0 0 0 0 0 0 None
0x31 16 dc 0 16 0 r y . 5 6 5 0 0 16 0 16 16 16 0 0 0 Slow
0x32 16 dc 0 16 0 r y . 5 6 5 0 0 16 8 16 16 16 0 0 0 Slow
suspect unrelated, but still curious
***********************************
In /var/log/XFree86.0.log, I get some of these. Anyone know offhand how to
disable this check? My hardware does not support APM.
(WW) Open APM failed (/dev/apm_bios) (No such file or directory)
--
Configure bugmail: http://bugs.xfree86.org/userprefs.cgi?tab=email
------- You are receiving this mail because: -------
You are the assignee for the bug, or are watching the assignee.
-------------------------------------------------------
This SF.net email is sponsored by: The SF.net Donation Program.
Do you like what SourceForge.net is doing for the Open
Source Community? Make a contribution, and help us add new
features and functionality. Click here: http://sourceforge.net/donate/
_______________________________________________
Dri-devel mailing list
[EMAIL PROTECTED]
https://lists.sourceforge.net/lists/listinfo/dri-devel
