Michel Dänzer wrote: > On Sun, 2009-01-25 at 20:03 +0100, Jörg-Volker Peetz wrote: >> with kernel 2.6.28 and 2.6.28.1 while in X with active DPMS screen off ("xset >> dpms force off") the CPU does not go into C3 state when idle. >> With 2.6.27.10 and 2.6.27.12 the CPU does fall into C3 state when idle as >> observed with powertop 1.11. > > Was the DRI already enabled with the 2.6.27 kernels? If yes, you may > need to use git bisect to find the change that introduced the problem. >
DRI was enabled both on 2.6.27 and 2.6.28. Today I also checked another hardware, a laptop with Pentium M CPU, Intel chipset ICH6, and ATI M22 [Mobility Radeon X300]. Similar behavior: while in X with active DPMS screen off ("xset dpms force off") there are nearly 60 wakeups/s instead of 3 wakeups/s with DPMS disabled. I've not done a git bisect before. It will take me a while. -- Best regards, Jörg-Volker. ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword -- _______________________________________________ Dri-devel mailing list Dri-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/dri-devel