Hi! I'm having problems writing and DVD-RW with a DVR-105 on a Debian stable r1.
Scanbus output: helium:~# dvdrecord -scanbus dvdrtools v0.1.3 Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]> Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling Linux sg driver version: 3.1.22 Using libscg version 'schily-0.5' scsibus0: 0,0,0 0) 'JLMS ' 'DVD-ROM LTD-165H' 'CH0U' Removable CD-ROM 0,1,0 1) 'PIONEER ' 'DVD-RW DVR-105 ' '1.00' Removable CD-ROM I've tried to burn a DVD with: dvdrecord -eject speed=2 -dev 1,0 -dao -v test.iso which produced a DVD which I couldn't read with Linux or Windows. The ISO was made with: mkisofs -r -J -o test.iso /var/test/ Then I tried to blank the same DVD with: dvdrecord -blank=all -v -dev 1,0 which resulted in this: dvdrtools v0.1.3 Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]> Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling TOC Type: 1 = CD-ROM scsidev: '1,0' scsibus: 0 target: 1 lun: 0 Linux sg driver version: 3.1.22 Using libscg version 'schily-0.5' atapi: 1 Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-105 ' Revision : '1.00' Device seems to be: Generic mmc2 DVD. Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). Driver flags : SWABAUDIO BURNFREE Supported modes: PACKET SAO Drive buf size : 1605632 = 1568 KB Current Secsize: 2048 ATIP start of lead in: -150 (00:00/00) Disk type: unknown Manuf. index: -1 Manufacturer: unknown (not in table) Starting to write CD/DVD at speed 1 in write mode for single session. Last chance to quit, starting real write in 0 seconds. Operation starts. Performing OPC... Blanking entire disk dvdrecord: Input/output error. blank unit: scsi sendcmd: no error CDB: A1 00 00 00 00 00 00 00 00 00 00 00 status: 0x2 (CHECK CONDITION) Sense Bytes: 70 00 03 00 06 B8 51 0E 00 00 00 00 51 00 00 00 Sense Key: 0x3 Medium Error, Segment 0 Sense Code: 0x51 Qual 0x00 (erase failure) Fru 0x0 Sense flags: Blk 440401 (not valid) cmd finished after 749.441s timeout 9600s dvdrecord: Cannot blank disk, aborting. The DVD is from Intenso. So what went wrong? thanks for your help markus _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users