On Mon, 2003-03-10 at 09:49, Felix Maibaum wrote: > Am Montag, 10. März 2003 02:29 schrieb Mike McLean: > > Hi, > > > > I've been having problems getting my Pioneer DVR-104 drive to work with > > dvdrecord. I have DMA disabled as suggested and I get the following: > > > > bird media # dvdrecord dev=0,1,0 -v -pad -eject -dao speed=2 > > why do you use -pad? are you trying to burn cdda to a DVD? > > > dvdrecord: Input/output error. send opc: scsi sendcmd: no error > > CDB: 54 01 00 00 00 00 00 00 00 00 > > status: 0x2 (CHECK CONDITION) > > Sense Bytes: 70 00 03 00 00 00 00 0E 00 00 00 00 73 03 00 00 > > Sense Key: 0x3 Medium Error, Segment 0 > > Sense Code: 0x73 Qual 0x03 (power calibration area error) Fru 0x0 > > Sense flags: Blk 0 (not valid) > > cmd finished after 10.145s timeout 200s > > dvdrecord: OPC failed. > > dvdrecord: fifo had 64 puts and 0 gets. > > dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. > > Sounds like a media problem. have you tried different media? Have you tried a > newer firmware? maybe the media type is newer than the firmware table? > also try specifying -force. > > other than that and really making sure that hdparm -r0 -d0 is set, I don't > have much advice for you. > > bye > > Felix > > > _______________________________________________ > Dvdrtools-users mailing list > [EMAIL PROTECTED] > http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
I've taken the -pad off, I don't know why I had that option on there. I've now tried both memorex (first) and fujifilm (second) dvd-r discs. Today I purchased the fuji film discs and at first it kicked the disc out saying it was an incompatible medium. But since then I upgraded the firmware from 1.32 to 1.40 and now it gets here and stops: tbird libolt # dvdrecord dev=0,0,0 -eject -force -dao speed=2 macgyver.iso dvdrtools v0.1.3 Portions (c) 2002-2003 Ark Linux <[EMAIL PROTECTED]> Based on: Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling scsidev: '0,0,0' scsibus: 0 target: 0 lun: 0 Linux sg driver version: 3.1.24 Using libscg version 'schily-0.5' Device type : Removable CD-ROM Version : 0 Response Format: 2 Capabilities : Vendor_info : 'PIONEER ' Identifikation : 'DVD-RW DVR-104 ' Revision : '1.40' Device seems to be: Generic mmc2 DVD. Also no matter what type of DVD-R I put in now it makes a whining sound after being in the tray for a few seconds. On the other hand, as I mentioned to Mike Morrey it takes my imation CD-RW discs and burns to them fine. I guess something with the drive is screwed up and tomorrow I'll take it back and get a replacement. Thanks for the help. Mike _______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users