the -atip option says:
fez:/archive # ./cdrecord-ProDVD -atip dev=1,0,0
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TDK '
Identifikation : 'DVDRW0404N '
Revision : '1.05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
ATIP start of lead in: -150 (00:00/00)
Disk type: unknown dye (reserved id code)
Manuf. index: -1
Manufacturer: unknown (not in table)
and the -toc option says:
./cdrecord-ProDVD -toc dev=1,0,0
Cdrecord-ProDVD-Clone 2.01a12 (i586-pc-linux-gnu) Copyright (C) 1995-2003 Jörg Schilling
Unlocked features: ProDVD Clone
Limited features: speed
This copy of cdrecord is licensed for: private/research/educational_non-commercial_use
scsidev: '1,0,0'
scsibus: 1 target: 0 lun: 0
Linux sg driver version: 3.1.24
Using libscg version 'schily-0.7'
Device type : Removable CD-ROM
Version : 0
Response Format: 2
Capabilities :
Vendor_info : 'TDK '
Identifikation : 'DVDRW0404N '
Revision : '1.05'
Device seems to be: Generic mmc2 DVD-R/DVD-RW.
Using generic SCSI-3/mmc CD-R/CD-RW driver (mmc_cdr).
Driver flags : MMC-3 SWABAUDIO BURNFREE
Supported modes: TAO PACKET SAO SAO/R96P SAO/R96R RAW/R16 RAW/R96P RAW/R96R
./cdrecord-ProDVD: Input/output error. read toc: scsi sendcmd: no error
CDB: 43 00 00 00 00 00 00 00 04 00
status: 0x2 (CHECK CONDITION)
Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 24 00 00 C0
Sense Key: 0x5 Illegal Request, Segment 0
Sense Code: 0x24 Qual 0x00 (invalid field in cdb) Fru 0x0
Sense flags: Blk 0 (not valid) error refers to command part, bit ptr 0 (not valid) field ptr 0
cmd finished after 0.001s timeout 40s
./cdrecord-ProDVD: Cannot read TOC header
./cdrecord-ProDVD: Cannot read TOC/PMA
is the fact that it cant read a TOC header good?since it is blank in theory I would think there wouldn't be a TOC..
really strange...
- Mike
Volker Kuhlmann wrote:
fez:/archive # ./cdrecord-ProDVD -dao dev=1,0,0 -v filename.iso
I've never tried to write isos in -dao mode. What happens if you leave that out?
-atip and -toc should show whether the media is really blank.
Volker
_______________________________________________ Dvdrtools-users mailing list [EMAIL PROTECTED] http://mail.nongnu.org/mailman/listinfo/dvdrtools-users
