hi, all. since upgrading from linux kernel 2.4 to kernel 2.6 dvdrecord now fails with the following error. i've tried with both ATA and ide-scsi interfaces and it fails in exactly the same way, and it also fails on two different DVD drives in different machines.
a search through the mailing list indicate that this might be a drive compatibility problem, but these drives did work prior to the change of kernel. does anyone have any idea what might eb going wrong? thanks. > [EMAIL PROTECTED]:/tmp# dvdrecord -v dev=/dev/dvd speed=2 -dao -data > /cdimage/cd.img dvdrtools v0.2.1 > Portions (C) 2002-2005 Ark Linux <[EMAIL PROTECTED]> > This program is free software; you can redistribute it and/or modify it under > the terms of the GNU General Public License as published by the Free Software > Foundation; either version 2, or (at your option) any later version. > > This program is distributed in the hope that it will be useful, but WITHOUT > ANY > WARRANTY; without even the implied warranty of MERCHANTABILITY or FITNESS FOR > A PARTICULAR PURPOSE. See the GNU General Public License for more details. > > You should have received a copy of the GNU General Public License along with > this program; see the file COPYING. If not, write to the Free Software > Foundation, 59 Temple Place, Suite 330, Boston, MA 02111-1307, USA. > Based on: > Cdrecord 1.11a15 (i686-pc-linux-gnu) Copyright (C) 1995-2001 Jörg Schilling > TOC Type: 1 = CD-ROM > scsidev: '/dev/dvd' > devname: '/dev/dvd' > scsibus: -2 target: -2 lun: -2 > Scanning device, b=4294967295 > Linux sg driver version: 3.5.27 > Using libscg version 'bero-0.5a' > dvdrecord: Warning: using inofficial version of libscg (bero-0.5a > '@(#)scsitransp.c 1.81 01/04/20 Copyright 1988,1995,2000 J. Schilling'). > atapi: 1 > Device type : Removable CD-ROM > Version : 0 > Response Format: 2 > Capabilities : > Vendor_info : '_NEC ' > Identifikation : 'DVD_RW ND-1300A ' > Revision : '1.05' > Device seems to be: Generic mmc2 DVD. > Using generic SCSI-3/mmc DVD-R(W) driver (mmc_mdvd). > Driver flags : SWABAUDIO BURNFREE > Supported modes: PACKET SAO > Drive buf size : 1605632 = 1568 KB > FIFO size : 4194304 = 4096 KB > Track 01: data 4375 MB > Total size: 5024 MB (497:48.22) = 2240117 sectors > Lout start: 5025 MB (497:50/17) = 2240117 sectors > Current Secsize: 2048 > ATIP start of lead in: -150 (00:00/00) > Disk type: unknown dye (reserved id code) > Manuf. index: -1 > Manufacturer: unknown (not in table) > Blocks total: 2298496 Blocks current: 2298496 Blocks remaining: 58379 > Starting to write CD/DVD at speed 2 in write mode for single session. > Last chance to quit, starting real write in 0 seconds. Operation starts. > Waiting for reader process to fill input buffer ... input buffer ready. > trackno=0 > BURN-Free is OFF. > dvdrecord: Success. reserve track: scsi sendcmd: no error > CDB: 53 00 00 00 00 00 22 2E 75 00 > status: 0x2 (CHECK CONDITION) > Sense Bytes: 70 00 05 00 00 00 00 0A 00 00 00 00 30 05 00 00 > Sense Key: 0x5 Illegal Request, Segment 0 > Sense Code: 0x30 Qual 0x05 (cannot write medium - incompatible format) Fru 0x0 > Sense flags: Blk 0 (not valid) > cmd finished after 0.003s timeout 200s > dvdrecord: Cannot open new session. > dvdrecord: fifo had 64 puts and 0 gets. > dvdrecord: fifo was 0 times empty and 0 times full, min fill was 100%. -- James F. Carter http://www.jfc.org.uk/ _______________________________________________ Dvdrtools-users mailing list Dvdrtools-users@nongnu.org http://lists.nongnu.org/mailman/listinfo/dvdrtools-users