What COM port and, if it is an internal modem, what interrupt is the modem using?
Mike / W8DN ----- Original Message ----- From: "KC4ALG J Sartain" <[EMAIL PROTECTED]> To: "DX4WIN Reflector" <Dx4win@mailman.qth.net> Sent: Monday, February 11, 2002 12:47 PM Subject: [Dx4win] dialup problem > I have discovered a problem since I began using my rig interface last week. > Please advise if anyone out there has a similar problem and/or what the > solution might be.... > > I use com 1 for my interface. The rig and DX4win works fine together except > for one phenomenon. If I turn on the rig before opening DX4WIN or my email > program, then the computer thinks I am already connected and will not > activate the dial up connection. It seems like the computer thinks the > activity on com1 is an already existing dail up connection. BUT, if I > connect to the internet before turning on the radio, then the automatic > dialup process works just fine. That is ok except I must wait a period > until the radio connection times out before being able to use DX4WIN. I am > using WinME, 56K modem, generic phone dialup service, and com1 is used for > the Kenwood. > > Is there a setting to eleviate this inconvenience, or should I just get used > to it? > > Thanks, > J Sartain KC4ALG > [EMAIL PROTECTED] > > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win >