Thanks for sharing that Roger - I'm certain that someone else will have the same problem and benefit from your success in resolving it.
73, Bob N5NJ ----- Original Message ----- From: "Roger Marrotte" <[EMAIL PROTECTED]> To: <Dx4win@mailman.qth.net> Sent: Thursday, January 30, 2003 4:56 PM Subject: [Dx4win] Problem with SO2R and DX4WIN 6.01 > Well I have fixed my problem with the use of SO2R and DX4WIN 6.01. I've > just finished installing a mod to the DX Doubler SO2R box listed on Top Ten > Devices Web Page. They make the DX Doubler. The mod is called "Fix for > Randomly Generated CW Key Down or PTT Active State Upon Computer Bootup". > They have you cut out two transistors, bevel the emitter holes on the > circuit board with a drill to unground these pads, reinstall 2 transistors > and reroute the two emitters to pin one of the parallel port connector. It > took me about 1/2 hour. SO2R is now working perfectly with DX4WIN 6.01 and > it's great. I hope this may help someone who might have the same problem. > 73, Roger, W1EM > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win