I went from the MP to the Mark V by just using the same set-up. No gender changes here and all works well. 73, Dusty - K3WC
----- Original Message ----- From: "Pete Smith" <[EMAIL PROTECTED]> To: "John Fleming" <[EMAIL PROTECTED]>; <Dx4win@mailman.qth.net> Sent: Thursday, November 25, 2004 7:46 AM Subject: Re: [Dx4win] DX4Win and FT1000MP >I don't know if it is the case for the MP, but my Mark 5 requires a gender >changer on the radio end of the standard cable. > > 73, Pete > > At 07:42 AM 11/25/2004, John Fleming wrote: > >> > Be absolutely certain that you have the CORRECT serial cable connecting >>your >> > computer to the FT1000MP. I do not have the manual here since I moved, >>but >> > it is a non-standard cable. >> >>Huh? I wouldn't have put it that way (nonstandard). It is a straight >>cable, rather than a null modem or cross-over, but all of these are >>"standard" cables. 73 - John, WA9ALS >> >> >>_______________________________________________ >>Dx4win mailing list >>Dx4win@mailman.qth.net >>http://mailman.qth.net/mailman/listinfo/dx4win > > _______________________________________________ > Dx4win mailing list > Dx4win@mailman.qth.net > http://mailman.qth.net/mailman/listinfo/dx4win