I am sure that the com port is a software generated port, either from microham or a usb to serial port. I get the same message occasionally. It happens during computer's stratup procedure. I believe that the computer still has not created the com port. Probably n1mm doesn't check if the com port exists or not. Same with writelog. I am not sure that is really useful this checking. If my com port is not there i will not have ptt. What's the problem and dx4win must check it. Maybe i want just to check my dxcc, an award, etc. Maybe it woud be better to check for com port only if i ask for it. Or better dx4win appears a warning message when i ask for a com port thet doesn;t exist. Especially for the cat control: ilke the way writelog works on this. If cat control exists then i have a freq reading, if not nothing happens (no freq). Instead of this dx4win tries for 5-6 times by default (i have changed mine to 1) to find the radio!!! I think there is no need for al these. 73 Kostas sv1dpi
----- Original Message ----- From: "Jay R. Holcomb" <wa0...@hotmail.com> To: <dx4win@mailman.qth.net> Sent: Thursday, April 07, 2011 12:37 AM Subject: Re: [Dx4win] Dx4win Digest, Vol 84, Issue 7 > > hi all, > just for the info, i have Win7-32 professional, and have the same thing > happen, sometimes opening DX4WIN 8.04, an error window comes up and says > the serial keying port is already open and it is not. usually i can > close and re-open dx4win and then all is well. > > i do use N1MM also that uses that same port, but have not been able to > figure out if there is a particular sequence that causes the error window > in DX4WIN. > 73 & soft landings, jay w, wa0www > > > --Forwarded Message Attachment-- > From: n...@arrl.net > CC: dx4win@mailman.qth.net > To: cristorce...@san.rr.com > Date: Tue, 5 Apr 2011 19:58:49 -0400 > Subject: [Dx4win] DX4WIN and Windows 7 > > My only problem is the serial keying port > when DX4WIN thinks it's busy when you > launch DX4WIN or Save Preferences. It's > an occasional problem that I've not yet chased down. > > I am using DX4WIN 8.04 with Windows 7 Ultimate 64-bit. > My system has no parallel ports so that isn't an option for me. > > 73, Byron > > > > ______________________________________________________________ > Dx4win mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:Dx4win@mailman.qth.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html > ______________________________________________________________ Dx4win mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Dx4win@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html