John, Select as follows: File Preferences QSO CW freq cutoff - Choose 30m Set Frequency (kHz) to 10,150 File Save Changes and Exit Your 30M selection should now come up as CW across the entire Band. If you want to set the SSB lower edge freq on all the Bands you use, follow the same procedure and enter that specific freq. GL/73, Bob K8BL
--- On Sun, 9/16/12, W5JMW <w5...@cableone.net> wrote: From: W5JMW <w5...@cableone.net> Subject: [Dx4win] 30 meter qso's To: DX4WIN@mailman.qth.net Date: Sunday, September 16, 2012, 8:20 PM I have a question for the group.The default setting on 30m(10.1) appears to be ssb.If I click on a dxspot to log that station the default is ssb.Of course that can not be and must be changed.I know it is very simple to change this.Is there a way so 30m defaults cw? thanks all,73 john ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
