Hal, I finally had a chance to test the bandmap on 12, 10 and 6 again as you and Jim, AD1C requested. It works fine on all bands with my K3. It will move the red arrow up and down as I tune the rx. It will jump to any spot (callsign) on the band whenever I double click on that spot -- either from the DX Spots window or the bandmap window. I have been active on 6M this summer, and I frequently use the bandmap to jump from one spot to the next on that band. It essentially tracks the Radio Frequency control window that I always have open when using DX4WIN. When the frequency is read from the K3 and updated in the Radio Frequency control window, it updates the frequency by moving the red arrow on the bandmap simultaneously. But I just closed that window and the bandmap still works fine on its own. It also tracks any frequency changes that I make using any of the memories from the K3. I just noticed that when the K3 is in split mode, the bandmap tracks the VFO B frequency. When I turn split off, it immediately goes back to tracking VFO A. All of this testing was done on 10M. But it works fine on all bands.
Dave, N4QS -----Original Message----- From: Hal Kennedy [mailto:hal...@comcast.net] Sent: Wednesday, July 31, 2013 9:04 AM To: n...@comcast.net Subject: Re: [Dx4win] Band Map Hi Dave, Jim, AD1C asks if you could try all bands once again. At Jim's place the bandmap will not autotrack on 12M and up per his recollection, and he thought that was the way it was designed... TNX! Hal N4GG On 7/30/2013 10:50 PM, Dave Perry, N4QS wrote: > Hal, > > FWIW, I have never noticed any problems with the Band Map following my > K3 -- even on 6 meters. I assume that you have checked Follow the > Radio in the lower right corner of the band map window. When that > little box is checked, the band map should follow the radio. It works > similar to the band map in N1MM. > > Dave, N4QS > > -----Original Message----- > From: dx4win-boun...@mailman.qth.net > [mailto:dx4win-boun...@mailman.qth.net] > On Behalf Of Hal Kennedy > Sent: Tuesday, July 30, 2013 6:03 PM > To: dx4win@mailman.qth.net > Subject: [Dx4win] Band Map > > Is it me - if it is maybe someone can give me the missing tip. I have > never been able to get the band map to successfully track the radio > other than intermittently. For some reason it seems worse on six > meters?? This is with two different rigs. Sometimes it tracks, > sometimes it doesn't, for no apparent external reason. > > All help welcome.. > > 73, > N4GG > > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > > This list hosted by: http://www.qsl.net Please help support this email > list: http://www.qsl.net/donate.html > > ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
