Hi Carol,
I'd argue that yes, you should upgrade, but there is a simple solution:
I found this in the archive from Paul from January 2005:
Paul,
The example given was for winNT/XP. For Windows/98 there is a different
driver and destination directory. From the on-line help:
for Win/95/98:
Windows\System\Vichw11.vxd
for Win/NT/2000/XP:
WinNT\System32\Divers\Vichw11.sys
I made some modifications in 6.04 to see if we can eliminate the problem.
--Paul
The searchable mail archives are at
http://www.mail-archive.com/dx4win@mailman.qth.net/ and are a great
resource.
On 5/31/2017 4:52 PM, Carol Richards wrote:
Hello....
After a long time using an XP computer, I upgraded to a windows 7
computer for numerous reasons. Eventually I will upgrade to windows
10. The problem...
I am using an older version of DX4WIN... version 6.02 and have the CD
for it. That version worked fine on my XP and I was able to keep it
current with the updater. I also upgraded the shack to an HP 6830
printer and installed all the drivers. It works fine. Unfortunately
when I tried to use the CD to put DX4WIN on the windows 7 machine,
everything went well until I tried to run the program. I got the error
message, " Port driver not found". Is it time for me to upgrade DX4WIN
6.02 or is there a way to cure this error....
Thanks,
Carol
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
--
73,
David, K2DBK
http://k2dbk.blogspot.com
http://k2dbk.com
twitter: @k2dbk
______________________________________________________________
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
