You did not say which version of DX4WIN you are using.
If you are in real-time add mode (F9) and using DX4WIN 8.0x, does the
Frequency field in the QSO window change when you spin the dial on the
On Fri, Jun 16, 2017 at 5:17 AM, Luis Teixeira <xx9...@gmail.com> wrote:
> I'm using one Yaesu FT1000 MP Mark V connected to DX4WIn V 8.05.
> When I select one spot/station/frequency from cluster , radio goes to
> frequency but ALWAYS on 17 m SSB showing exact frequency in Freq (MHz), no
> matter what band the spot is.
> What's happening? In Set-up parameters I have as Default 20 m SSB.
> Thanks for your help.
> Best 73 de Luis, CT4NH in behalf of CT1EEQ
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
Jim Reisert AD1C, <jjreis...@alum.mit.edu>, http://www.ad1c.us
DX4WIN mailing list
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html