Hello Paul, Yes, there are only three characters in FT8, so you need to change all of those MODE:4 to MODE:3. You won't have to fuss with this when the new version comes out :-)
73, Mike W0VTT -----Original Message----- From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Paul Ferguson Sent: Monday, 14 August, 2017 17:22 To: dx4win@mailman.qth.net Subject: [Dx4win] Format for FT8 mode Input in ADIF file for TQSL? I used DX4WIN LOTW > Export to LOTW. Most of the QSOs in this batch were FT8 mode. I then edited the LOTW ADIF formatted file to indicate FT8 mode on all FT8 QSOs. I noticed the file entry for a JT65 QSO mode was "<MODE:4>JT65" so I tried "<MODE:4>FT8" on FT8 QSOs. When I use the TQSL V2.3.1 with Configuration data V11.1, it says "Invalid MODE (FT8)" on the first line containing the new mode. Is it the "MODE:4" that is incorrect? 73, Paul K5ESW ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html