I recently went through this same exercise. Received help directly from Paul. In the end, after several tries, he suggested I note all settings, then delete the .cfg file.
After doing so I logged back into DX4WIN then clicked on FILE/PREFERENCES and re-entered all the data applicable to my station. Luckily I had written down the info needed to allow DX4WIN and my radios to communicate (IN "RADIO" tab). I then exited the program being sure to SAVE when asked. The problem was corrected. Hope this will help. Arne N7KA > On November 22, 2017 at 9:03 AM "w...@att.net" <w...@att.net> wrote: > > > Fixed column count must be less than Collin count > I brought it up this morning windows 10 version 805 this is what I got all > the windows are corrupted > I tried copying her old INI file but that didn’t work either > Any suggestions greatly appreciated > All of the personal info is now blank > Bernie:WO2N > > Sent from my iPhone > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to n...@comcast.net > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html