And with that configuration, using a USB port as a serial port, you'll need to go into that port in Windows and make sure you have it set to be a virtual serial port with the settings that match.
Tim Moore On Wed, Dec 19, 2018, 3:14 PM Steve Hart <k...@charter.net wrote: > Using Win 10 current version, Yaesu FTdx5000, and cannot get them to talk > to each other. Using the serial port on the 5000, an RT Systems USB-63 > cable w/the FD-11 chipset, and a USB connector on the other end. I’m > assuming I have a comport assignment problem. Is there a specific comport > number, speed,etc that I should be using for each? Tnx/73 Steve > k...@charter.net > ______________________________________________________________ > DX4WIN mailing list > Home: http://mailman.qth.net/mailman/listinfo/dx4win > Help: http://mailman.qth.net/mmfaq.htm > Post: mailto:DX4WIN@mailman.qth.net > Message delivered to redval...@gmail.com > > This list hosted by: http://www.qsl.net > Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net Message delivered to arch...@mail-archive.com This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
