Hi Henrik, CW frequency cutoff is available in preferences and can be set to your needs, then SSB starts Digital is not possible because there is no specific allocation for it. Example 20M - 14000 <> 14150 = CW, 14150 <>14350 = SSB +/- in the middle of CW are all the digital modes, if someone starts cqing in CW on 14074 He can't be flamed because he is not doing something wrong. Everybody accepted digital Mode between +/- 14070 and 14100 but it is no rule, check it out when there is a major contest. A worse example is 40M, 7038 for rtty/digital (cw part) and 7074 for rtty/digital (ssb part)
My 2cents Guy ON4AOI - OT7K -----Original Message----- From: dx4win-boun...@mailman.qth.net <dx4win-boun...@mailman.qth.net> On Behalf Of henrikwei...@gmail.com Sent: Thursday, February 25, 2021 4:42 PM To: dx4win@mailman.qth.net Subject: [Dx4win] CW cut off frequency Am I the only one that is missing an expansion of user settings regarding CW/SSB/DIGI frequency cut off. Would be nice if one could define a frequency span (start/stop) for example DIGI. OZ1ING Henrik ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ DX4WIN mailing list Home: http://mailman.qth.net/mailman/listinfo/dx4win Help: http://mailman.qth.net/mmfaq.htm Post: mailto:DX4WIN@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
