Thank you I will try that, hopefully, this weekend. I'll let you know the results as well.
Very Respectfully, Kostas Diotis -------- Original Message -------- On Jan 7, 2022, 3:44 PM, Kevin Bowling wrote: > Do you know why the driver is poorly integrated with the PHY on these > devices? There is an unmitigated thermal loss on X552; PHY gets too > hot and connectivity drops, you usually have to cycle the system. It > should be possible to reset the PHY and other Intel NICs implement > this. > > See: > https://tinkertry.com/how-to-work-around-intermittent-intel-x557-network-outages-on-12-core-xeon-d > > On Tue, Jan 4, 2022 at 12:17 PM Fujinaka, Todd <todd.fujin...@intel.com> > wrote: >> >> I had to ask for help on this as I don't keep up with SoC parts, but the >> problem appears that we don't support the copper module. Until you reboot, >> the part could be confused if you plug it in. >> >> This should all be in the readme: >> >> Devices based on the Intel(R) Ethernet Connection X552 and Intel(R) Ethernet >> Connection X553 do not support the following features: >> * Energy Efficient Ethernet (EEE) >> * Intel PROSet for Windows Device Manager >> * Intel ANS teams or VLANs (LBFO is supported) >> * Data Center Bridging (DCB) >> * IPSec Offloading >> * MACSec Offloading >> In addition, SFP+ devices based on the Intel(R) Ethernet Connection X552 and >> Intel(R) Ethernet Connection X553 do not support the following features: >> * Speed and duplex auto-negotiation. >> * Wake on LAN >> * 1000BASE-T SFP Modules >> >> >> Todd Fujinaka >> Software Application Engineer >> Ethernet Products Group >> Intel Corporation >> todd.fujin...@intel.com >> >> -----Original Message----- >> From: SPRTN <sp...@sprtndev.com> >> Sent: Friday, December 31, 2021 12:51 AM >> To: e1000-de...@lists.sf.net >> Subject: [E1000-devel] Issue With IXGBE >> >> Support Team, >> >> I noticed a potential issue with the IXGBE 5.13.4. >> >> My hardware is a Supermicro A2SDI-TP8F, using it's two SFP+ ports that are >> using Intel X553 drivers. I am using the Untangle OS 16.4.1, which is based >> off of Ubuntu. >> >> When a Copper module is plugged into the SFP+ port the ethtool command >> shows, FIBRE, however, when a Fiber/Optical Direct Attach Cable is used the >> ethtool command shows Copper Direct Attach, and no connection is ever >> established. Is it possible that there is an issue in the *.ko file? >> >> Appreciate your time and help. If there is any more information you need me >> to send over, please let me know. >> >> Very Respectfully, >> Kostas Diotis >> _______________________________________________ >> E1000-devel mailing list >> E1000-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/e1000-devel >> To learn more about Intel Ethernet, visit >> https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet >> >> >> _______________________________________________ >> E1000-devel mailing list >> E1000-devel@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/e1000-devel >> To learn more about Intel Ethernet, visit >> https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet _______________________________________________ E1000-devel mailing list E1000-devel@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/e1000-devel To learn more about Intel Ethernet, visit https://forums.intel.com/s/topic/0TO0P00000018NbWAI/intel-ethernet