No Tom..only when running the KPA/100 did we hear the spur.   I fixed it
with the help of Ron ZL1TW but it may be considered an untested/experimental
mod and as such did not get posted to the Elecraft reflector.

I've e-mailed Gary and told him of my successful experience with it.   There
are 5 of us who have done the mod and it has worked for all.   Hopefully it
will get posted here for others to see.   It did not show up when I searched
the old archives.

Thanks to everyone for all the e-mails on this.

73 de Tom K2TA
K2/100 #1117


----- Original Message ----- 
From: "Tom Arntzen" <[EMAIL PROTECTED]>
To: <elecraft@mailman.qth.net>; "Tom Althoff" <[EMAIL PROTECTED]>
Sent: Tuesday, November 30, 2004 2:03 PM
Subject: Re: [Elecraft] KPA-100 spur on 160M?


> Is this spur present when running full power QRP?
> Try 15watt to see if the spur is made by the K2 itself .
> Turn PA off in menu or power K2 from it's DC barrel jack.
> If it's gone you know it's made by or with interaction of the KPA100.
>
> Tom LA1PHA
>
> ----- Original Message ----- 
> From: "Tom Althoff" <[EMAIL PROTECTED]>
> To: "Elecraft" <elecraft@mailman.qth.net>
> Sent: Tuesday, November 30, 2004 9:07 AM
> Subject: [Elecraft] KPA-100 spur on 160M?
>
>
> Has anyone who experienced oscillation with their KPA-100 (internally or
> externally mounted) seen a spur about 1Khz up from the main signal?
>
> If I crank up my power to 100W a very "brrrrrippy" spur pops up just above
> my signal only on 160M.   If I keep the power at 95W or less it is not
> there.
>
> I do not hear it in my external rx when the amp is bypassed.
>
> I keep it at the 90W level if I am operating barefoot on 160M of course
but
> if this is not normal or never before seen then I'd be tempted to look
into
> a wiring error in the PA.
>
> I eventually want to wire the PA externally.   Elecraft recommends
> troubleshooting the KPA-100 while it is mounted in the K2 so I'd like to
> clean this up before extending the PA away from the K2 and a new can of
> worms gets opened.
>
> 73 de Tom K2TA
>
> _______________________________________________
> Elecraft mailing list
> Post to: Elecraft@mailman.qth.net
> You must be a subscriber to post to the list.
> Subscriber Info (Addr. Change, sub, unsub etc.):
> http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/subscribers.htm
> Elecraft web page: http://www.elecraft.com
>
>
>

_______________________________________________
Elecraft mailing list
Post to: Elecraft@mailman.qth.net
You must be a subscriber to post to the list.
Subscriber Info (Addr. Change, sub, unsub etc.): 
http://mailman.qth.net/mailman/listinfo/elecraft    
Help: http://mailman.qth.net/subscribers.htm
Elecraft web page: http://www.elecraft.com

Reply via email to