Hi All, For the last few weeks I have used the Diversity on the low bands with good success.
Tonight I came into the shack and found my K3 acting strange. While in diversity, 4SQ hooked to main RX antenna port and Beverages hook to AUX port, the same configuration I had for weeks. As I tune the band, the audio nulls out about every 0.5KHz where the audio gets very low. The S meter seems unchanged, only the audio is affected. I switched back to Normal receive and sounds fine. Then back into Diversity and I get this nulling of the audio again. Sounds as if a Auto notch was enabled, buts its OFF. The radio has been left for three weeks continuously. I recycled power without change. I am running the latest MCU 4.22 / DSP 2.70 / FPF 1.14, 11-15-2010 I could speculate what it might but I bet this has been seen before. Maybe a operator thing but nothing was changed in the radio from the last time I used it and it worked fine. Suggestions? Thanks in advance, Dave Anderson, K4SV Tryon, NC www.K4SV.com ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html