Igor, What mode? How are you determining that the TX and RX frequencies are different? There should be no difference in SSB, and in CW the difference should be equal to the sidetone pitch.
73, Don W3FPR On 4/23/2012 1:23 PM, Igor Sokolov wrote: > The problem was finally tracked down to X3,X4 crystals. Changing one of them > (only one was found in a local shop) cured the intermittent frequency > change. BFO frequency range is within the accepted limits (a bit more then > 3.6 kHz). VFO linearization and CAL FIL is done. Now I have another > problem. TX and RX frequencies do not coincide. The difference is band > dependant. It is 30Hz on 80m and 260Hz on 28 MHz. Although the radio is > usable with engaged RIT (OR XIT) I would like to cure the new problem. > Can somebody root me in the right direction please > > 73, Igor UA9CDC > ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html