It nicely notches away a broadcasting carrier at 7200 kHz here, tried
with THR 12, 16 and 20. 

Pf

>>>>> "Rick" == Rick Bates <happymooseph...@gmail.com> writes:


    Rick> Hi Guy,
    Rick> Lyle also contacted me and it's appearing that AGC THR at 16 is not 
allowing
    Rick> a 15 db signal (P3) to not get notched.  It works beautifully at THR 
7,
    Rick> completely gone.

    Rick> I sat and watched as both DSP were updated and it shows the 
appropriate
    Rick> codes on the display.

    Rick> It's likely along the lines of me not fully understanding what I'm 
doing.
    Rick> ;-)

    Rick> 73,
    Rick> Rick

    Rick> -----Original Message-----
    Rick> From: Guy Olinger K2AV

    Rick> I have 4.51 in and the auto notch is working fine.

    Rick> Did your log on the utility show the DSP transferring as well?  You
    Rick> need to use the transfer all files.  On my CONFIG: FW REVS do I have
    Rick> uC=04.51, d1=02.76, d2=02.76, FL=01.15, dr=01.03

    Rick> I checked the contents of the zip in the beta directory with the zip
    Rick> of 4.51 distributed to pre-beta testers and they look the same.

    Rick> 73, Guy

    Rick> On Mon, May 14, 2012 at 2:03 PM, Rick Bates 
<happymooseph...@gmail.com>
    Rick> wrote:
    >> I think the new AGC sounds great.  However, auto-notch is no longer
    Rick> working.
    >> I can manually notch, but auto mode does nothing (LSB).
    >> 
    >> Firmware is 4.51 and I've also installed the latest DSP firmware (in both
    >> DSP).  I've also cycled the power, no change.
    >> 
    >> AGC DCY Nor
    >> AGC Hold        0.00
    >> AGC PLS Nor
    >> AGC SLP 000 (tried 001, same results)
    >> AGC THR 016 (tried different values, no change)
    >> AGC F           120
    >> AGC S           020
    >> 
    >> Rick wa6nhc
    >> 
    >> 
    >> ______________________________________________________________
    >> Elecraft mailing list
    >> Home: http://mailman.qth.net/mailman/listinfo/elecraft
    >> Help: http://mailman.qth.net/mmfaq.htm
    >> Post: mailto:Elecraft@mailman.qth.net
    >> 
    >> This list hosted by: http://www.qsl.net
    >> Please help support this email list: http://www.qsl.net/donate.html

    Rick> ______________________________________________________________
    Rick> Elecraft mailing list
    Rick> Home: http://mailman.qth.net/mailman/listinfo/elecraft
    Rick> Help: http://mailman.qth.net/mmfaq.htm
    Rick> Post: mailto:Elecraft@mailman.qth.net

    Rick> This list hosted by: http://www.qsl.net
    Rick> Please help support this email list: http://www.qsl.net/donate.html

-- 
Pierfrancesco Caci, ik5pvx
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Reply via email to