Buck, I have my KX3 running using the NaP3 software with the same sound card you have. The operating system is Windows 7. The one thing I found out quickly was that I needed the beta driver from Creative Labs. The rest of it was a little more than a little fiddling with the set up. But, it works rather nicely. I can point and click and the the radio tune to that signal. It's great!! I also have PowerSDR-IQ running with the radio, but it only operates as a panadapter; PowerSDR-IQ doesn't control the radio like NaP3.
There are just two issues I've run into. The first, I have not been able to get VAC to work with NaP3. Secondly, I can hear the refresh click in the outputted audio. This doesn't happen in any of the other SDR software I've tried. Some suggestions: 1. Start with the sample rate set to 48 KHz. 2. Install Omnirig - available for free on the web 3. Make your input and out put card set to the EMU-0202 and use the audio jack of the soundcard to connect to a powered stereo speaker. 4. Make sure you are really plugged into the EMU-0202 as you think you need. Best of luck and enjoy. 73, Barry K3NDM ----- Original Message ----- From: "Buck k4ia" <k...@aol.com> To: elecraft@mailman.qth.net Sent: Wednesday, August 1, 2012 10:40:09 PM Subject: [Elecraft] KX3 I/Q output for pandapter I am fooling around with an EM0202 external soundcard and NaP3 which works just fine with an LpPan pandapter providing the I/Q from my K3 but I am not having much luck with the KX3, I have turned on the RX I/Q in the menu and run the I/Q output from the KX3 to the soundcard. I had to crank the gain way up but the signals are not there - just images, a blip in the center frequency and mirrored spurs on either side. . Before I go crazy trying to get this to work, is it fully implemented at this time and should it work? If it is, I will go about trouble shooting my cables and connectors. -- Buck k4ia K3 # 101 KX3 #715 ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
