Thanks Bob and Don (Don that's two I owe, you helped me in the past on my K2 build :-) - I had FL5 selected instead of FL1 (2.8), which would explain things (FL5=250Hz). 5W Cal now completed successfully.
Thanks! Ken, G0RVH -- Ken Dailey On 9 Sep 2012, at 13:34, Bob Wolbert, K6XX wrote: > Your transmit filter is not configured correctly. Look at the 2.7 ( or 2.8) > filter. Is it enabled for CW transmit? > > 73 de Bob, K6XX > > On Sep 9, 2012, at 2:53 AM, Ken Dailey <ken.dai...@mac.com> wrote: > >> I'm just building a new K3, and have come to the point of performing the TX >> Gain Calibration. I have the K3 hooked up to the iMac via a KUSB, and the >> two are talking to each other fine. However when I run the 5W gain cal, I >> get this failure message : >> >> Elecraft K3 Utility for OS X Version 1.12.3.28B >> OS X Version 10.7.4 (Lion) >> K3 MCU version 04.51. RS-232 speed 9600 bps. >> Starting 5 watt calibration. >> Calibrating at 1.900 MHz >> IsSamplingComplete: Unexpected response 'DS@@@@1∞>IÄÄ;' to 'DS;'. State 220 >> Calibration power settled at 'ERR TXF;' >> 5 watt calibration failed. >> Elapsed time: 6.6 secs >> >> Anyone have any ideas what the problem is? >> >> Thanks, >> >> Ken, G0RVH >> >> -- >> Ken Dailey >> >> ______________________________________________________________ >> Elecraft mailing list >> Home: http://mailman.qth.net/mailman/listinfo/elecraft >> Help: http://mailman.qth.net/mmfaq.htm >> Post: mailto:Elecraft@mailman.qth.net >> >> This list hosted by: http://www.qsl.net >> Please help support this email list: http://www.qsl.net/donate.html ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html
