I have had a P3 for some time but only very recently did I build it and install it, and only now am I trying to learn it.
The first problem encountered is as follows. I tried QSYing the K3 to a marker frequency, but no QSY occurs when either marker is selected and the Select knob is tapped. Yes, there is an RS232 connection between the K3 and P3. The RS232 line also connects in parallel to a MicroHam router, and a SteppIR SDA100 controller through Y splitter cables. So I asked myself "Are these additional breakouts preventing QSY to the marker frequency?" To answer, I disconnected the MicroHam and SteppIR controller, with no difference. Am I missing something here? Is there an enabling configuration selection in the K3? Garry, NI6T ______________________________________________________________ Elecraft mailing list Home: http://mailman.qth.net/mailman/listinfo/elecraft Help: http://mailman.qth.net/mmfaq.htm Post: mailto:Elecraft@mailman.qth.net This list hosted by: http://www.qsl.net Please help support this email list: http://www.qsl.net/donate.html