There's an explanation of the reasons for this in the P3 Owner's Manual
in the "How to set up and Interpret the P3 Display" section. Start
reading where it says, "You would expect the S meter on the K3 and the
signal on the P3 display to indicate the same level..."
Alan N1AL
On 04/01/2014 10:54 AM, Bud Governale wrote:
My P3 always matched S meter signal level to the K3.
This morning with the S0 on the K3 ( with antenna disconnected) the P3 is
displaying a level about 7 db below the S0 level.
With antenna connected the K3 shows S7 while the P3 level on the screen is
slightly below S0.
What happened and how do I fix this?
73,
Bud W3LL
w...@arrl.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to n...@sonic.net
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
