The old tube rigs and their frame relay T/R are famous for glitching the
leading edge of the first dit or syllable. The problem with arcs is that
the arc is not just composed of the single frequency that is creating. The
broad signal resulting from the arc will be very highly invested with
off-band components There are many faults in the olde stuffe that usually
need cleaning up to run smoothly with modern stuff, with the modern
expectations.

I never had a KAT500 to go with my Yaesu FT101ZD. I also had to use a foot
switch for T/R.

73, Guy

On Sat, Oct 25, 2014 at 3:45 PM, Don Wilhelm <w3...@embarqmail.com> wrote:

> Eric,
>
> What is the chance that the transceiver and amplifier are 'spiking' at
> keydown time.  That can cause a fault in the KAT500.  Try turning the power
> down and see if it continues.
>
> Do you have the K3 and KPA500 as well?  If so, does the KAT500 fault when
> they are used?
>
> 73,
> Don W3FPR
>
>
> On 10/25/2014 6:00 AM, eric norris via Elecraft wrote:
>
>> I am using a KAT500 to control my station's antenna switching.  Tonight
>> when I used a tube transceiver and amplifier, I would get a FAULT about
>> every 5-10 minutes.  Power was 650w.  Here are the KAT500's parameters:
>> f=7032, VSWR 1.13, BYPASS VSWR 1.8, TUNE STATE 0 9 20 1.13, fm 1.67.  Any
>> idea what is going on?
>> Thanks and 73,
>> Eric WD6DBM
>>
>>
> ______________________________________________________________
> Elecraft mailing list
> Home: http://mailman.qth.net/mailman/listinfo/elecraft
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:Elecraft@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
> Message delivered to k2av....@gmail.com
>
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to